During the flotation process, hydrophobic minerals are transferred to the foam by bubbles.
The size of bubbles has a significant influence on the capture probability of the bubbles and …

As a continuous phase, fluid creates a specific environment for the whole flotation process,
and accordingly play important roles. This paper aims to characterize the fluid intensification …

Different aspects of the stable boundary‐layer structure are contrasted between the very
stable and the weakly stable regimes from a new point of view. This study finds a limit wind …

The effects of stable thermal stratification on turbulent boundary layers are experimentally
investigated for smooth and rough walls. For weak to moderate stability, the turbulent …

The aim of this paper is to analyse the thermal effects in a wind tunnel experiment to
simulate the planetary boundary layer (PBL). Experiments were performed in the wind …

An open jet wind tunnel with an exit area of 23​×​ 9​ m 2 has been built to study the
behaviors of large-scale pool fires under controlled wind conditions. A series of …

The terms of the budget equations for turbulence kinetic energy (TKE), heat, flux, and
temperature variance are evaluated observationally using 4 levels of turbulence …

Reynolds stress anisotropy is estimated from the stress spheroids, based on 20 Hz
ultrasonic anemometer measurements, performed in the coastal area of northern France …

Dispersion characteristics and flotation recovery of different size coal slimes affected by the
impeller stirring speed or effective power in a mechanical flotation cell were investigated …

The primary parameter of a standard k-ϵ model, C μ, was calculated from stereoscopic
particle image velocimetry (PIV) data for a supersonic jet exhausting into a transonic …