So far, a few chemical solution routes for the fabrication of ferroelectric HfO2 films have been
reported. Most of them employ precursors, solvents or additives that are considered difficult …

The cadmium sulfide (CdS) n-type semiconductor is one of the most used as a window layer
in thin-film solar cells, such as CdTe, CIS, CIGS, and CZTS. Optoelectronic properties are …

CZTS films were obtained by spray pyrolysis, a low-cost technique implemented on an
industrial scale. Sulfurization processes generally enhance CZTS properties for its use in …

Abstract Cd 2 SnO 4/CdS/CdTe/Cu x Te/Au structure solar cells were made in samples of
20× 20 mm 2. Multiple metallic back-contacts were deposited on each sample by thermal …

In this work, we studied the effect of the triethanolamine (TEA) concentration on the
physicochemical properties of copper sulfide (CuS) thin films deposited by the ammonia-free …

In this work, we report impedance spectroscopy (IS) study on CdS/CdTe-based solar cells.
The physical parameters of the cell were computed in the dynamic regime to access to the …

A set of cadmium sulfide (CdS) thin films was grown on glass substrates by the chemical
bath deposition technique at different bath temperatures (T b). A microwave oven was used …

Cadmium Sulfide thin films were deposited on soda-lime glass substrates by chemical bath
deposition technique at bath pH varying from 8 to 11. The films were annealed at …

The objective of the present study is to provide the effect of immersion time and CO32−
concentration on the structural and optical properties of CdS films. Chemical bath deposition …

CdS films were grown on SnO2: F substrates by Chemical Bath Deposition at 90° C,
thiourea was employed as Sulphur source at two concentrations; 0.1 M and 0.075 M. The …