The effect of grain size on the viscoplastic behaviour of M5 Framatome zirconium alloy thin
sheets was investigated at high temperature under uniaxial tension, using a variety of …

Present study explains the micromechanics of superplastic deformation of Zr-2.5 wt.% Nb
alloy using EBSD analysis. The alloy when deformed in tension at 700° C and 10− 3 s− 1 …

Cold-rolled Inconel 718 with a reduction of 84% exhibited excellent superplasticity at 950° C
with a high strain rate, which improves forming efficiency and reduces device dependency …

In the present work, creep tests on Zr–2.5 Nb alloy at different stresses and temperatures in
the two-phase region were carried out. The three creep regions were very distinct at low …

The effect of grain size on superplastic deformation in Zr–2.5 wt.% Nb was studied by
constructing processing maps (which depict the variation of strain rate sensitivity with …

In the current work, the high-temperature deformation behaviour of Zr-2.5 Nb alloys used in
pressurized heavy water reactors has been studied. Uniaxial tensile tests were carried out …

Deformed two-phase Zr–2.5 Nb was subjected to 700° C annealing and associated
coarsening. After primary recrystallization, the second-phase body-centered cubic β was …

The formation and evolution of the adiabatic shear bands in the zirconium alloy impacted by
split Hopkinson pressure bar were investigated by means of the experimental design. The …

High-temperature tensile tests were carried out on Zr-2.5 Nb alloy in the temperature range
of 298–873 K for both longitudinal and transverse specimen directions. Kocks-Mecking (KM) …

The present paper studies the influence of the microalloy on the characteristics of the some
steel classes destined to manufacturing the oil pipes. Added to the realization of high report …