A review of mixed mode I-II fracture criteria and their applications in brittle or quasi-brittle fracture analysis

W Hua, J Li, Z Zhu, A Li, J Huang, Z Gan… - Theoretical and Applied …, 2023 - Elsevier
Fracture criteria play a very important role in predicting crack propagation behavior and life
evaluation of cracked bodies. In this paper, mixed mode I-II fracture criteria in the framework …

Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches

F Berto, P Lazzarin - Materials Science and Engineering: R: Reports, 2014 - Elsevier
Brittle failure of components weakened by cracks or sharp and blunt V-notches is a topic of
active and continuous research. It is attractive for all researchers who face the problem of …

Fracture analysis of sandstone with a single filled flaw under uniaxial compression

S Miao, PZ Pan, Z Wu, S Li, S Zhao - Engineering Fracture Mechanics, 2018 - Elsevier
Natural rock joints with infilling materials such as clay, broken rock fragments, or even
cement mortar infusion material are common in the field of rock engineering. The fracture …

[HTML][HTML] Thermal effects on prediction accuracy of dense granite mechanical behaviors using modified maximum tangential stress criterion

G Feng, C Zhu, X Wang, S Tang - Journal of Rock Mechanics and …, 2023 - Elsevier
Thermally-induced changes in the fracture properties of geological reservoir rocks can
influence their stability, transport characteristics, and performance related to various deep …

Experimental investigation of thermal cycling effect on fracture characteristics of granite in a geothermal-energy reservoir

G Feng, X Wang, M Wang, Y Kang - Engineering Fracture Mechanics, 2020 - Elsevier
The fracture characteristics of fine-grained granite were examined for a potential geothermal-
energy reservoir. The granite was thermally cycled in a furnace between 100° C and 300° C …

Mixed mode fracture parameters and fracture characteristics of diorite using cracked straight through Brazilian disc specimen

Q Zhu, D Li, X Li, Z Han, J Ma - Theoretical and Applied Fracture Mechanics, 2023 - Elsevier
In this study, the cracked straight through Brazilian disc (CSTBD) specimen was applied to
study the I/II mixed mode static fracture of diorite. The fracture load and fracture toughness …

A review of T-stress and its effects in fracture mechanics

M Gupta, RC Alderliesten, R Benedictus - Engineering Fracture Mechanics, 2015 - Elsevier
An overview of past research on T-stress is presented in this paper. Beginning with the
origin of T-stress, the authors discuss different phenomena associated with T-stress: crack …

Influence of thermal treatment on mode I fracture toughness of certain Indian rocks

B Mahanta, TN Singh, PG Ranjith - Engineering Geology, 2016 - Elsevier
An experiment was carried out to measure the static mode I fracture toughness of
Manoharpur sandstone, Bellary dolerite and Dholpur sandstone after thermal treatment at …

Cost optimization of cemented paste backfill: State-of-the-art review and future perspectives

K Fang, J Zhang, L Cui, S Haruna, M Li - Minerals Engineering, 2023 - Elsevier
A primary challenge in the mining industry is how to extract mineral and metal resources in a
cost-effective and environmentally-friendly way. To help mitigate the environmental issues …

Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend …

N Razavi, MRM Aliha, F Berto - Theoretical and Applied Fracture Mechanics, 2018 - Elsevier
Mixed mode brittle fracture behaviour of granite rock is studied experimentally and
theoretically using Asymmetric Four Point Bend (AFPB) specimens containing pre-cracks …