The study of heterostructured materials (HSMs) answered one of the most pressing
questions in the metallurgical field:“is it possible to greatly increase both the strength and the …

Aluminum alloys are widely sought for different applications due to their high strength-to-
weight ratio. Most often this increased strength of the alloy is achieved by specific alloying …

A grey-based Taguchi method was applied to investigate the optimal operating conditions in
shielded metal arc welding (SMAW) to join SS316 and ASTM A36. This work aims to set …

The deformation behavior of a hot roll-bonded stainless steel/carbon steel (STS/CS) clad
plate is investigated by focusing on the mechanical properties-microstructure relationship …

Directed energy deposition and laser cladding technologies are suitable advanced
manufacturing techniques for applying corrosion-resistant claddings to large carbon steel …

Galvanic corrosion is prevalent in many dissimilar metal welds (DMW) in-service
applications. Nevertheless, there is a scarcity of systematic investigations regarding the …

Laser hot wire cladding is an efficient and energy-saving additive manufacturing process,
which is used in coating, repair, and 3D printing. In this study, 308L stainless steel wire was …

The effects of oxide film and exposure time on the galvanic corrosion between low alloy
steel (LAS) A508 and 309/308L stainless steel (SS) dissimilar metals were studied by …

The microstructure development and mechanical behaviour of dissimilar metal welds
between ferritic and austenitic steel, as well as their application in nuclear power plants, are …

The corrosion behaviour of Al-containing alloys in KCl-MgCl 2 at 700° C was investigated
and compared with that of commercial alloys. The developed Al-containing alloys showed …