A review on cell/stack designs for high performance solid oxide fuel cells
Besides the general advantages of fuel cells, including clean and quiet operation, solid
oxide fuel cells (SOFCs) as being one of the high-temperature fuel cells also provide a …
oxide fuel cells (SOFCs) as being one of the high-temperature fuel cells also provide a …
Recent fabrication techniques for micro-tubular solid oxide fuel cell support: a review
Micro-tubular solid oxide fuel cell (MT-SOFC) has recently attracted much attention due to
their greater tolerance to thermal cycling, quicker start-up capability, higher output density …
their greater tolerance to thermal cycling, quicker start-up capability, higher output density …
High-performance, anode-supported, microtubular SOFC prepared from single-step-fabricated, dual-layer hollow fibers
A high-performance, microtubular solid oxide fuel cell is developed using an improved
electrolyte/anode dual-layer hollow fiber fabricated via a novel coextrusion and co-sintering …
electrolyte/anode dual-layer hollow fiber fabricated via a novel coextrusion and co-sintering …
Micro-tubular solid oxide fuel cells and stacks
KS Howe, GJ Thompson, K Kendall - Journal of Power Sources, 2011 - Elsevier
The properties and performance of micro-tubular solid oxide fuel cells are compared and the
differentiating factors discussed. The best recorded power density for a single cell in the …
differentiating factors discussed. The best recorded power density for a single cell in the …
[SÁCH][B] Gas transport in solid oxide fuel cells
W He, W Lv, J Dickerson - 2014 - Springer
The ultimate goal of this book is to provide an integrated view of the basic theory, materials
science, and engineering of gas transport in solid oxide fuel cells (SOFCs). Further, this …
science, and engineering of gas transport in solid oxide fuel cells (SOFCs). Further, this …
[HTML][HTML] Effect of kaolin particle size and loading on the characteristics of kaolin ceramic support prepared via phase inversion technique
In this study, low cost ceramic supports were prepared from kaolin via phase inversion
technique with two kaolin particle sizes, which are 0.04–0.6 μm (denoted as type A) and 10 …
technique with two kaolin particle sizes, which are 0.04–0.6 μm (denoted as type A) and 10 …
Status and improvement of dual-layer hollow fiber membranes via co-extrusion process for gas separation: A review
Carbon dioxide (CO 2) is the main culprit of greenhouse gases produced mainly via the
combustion of fossil fuel. This paper reviewed the performance of emerging dual-layer …
combustion of fossil fuel. This paper reviewed the performance of emerging dual-layer …
Single-step fabrication and characterisations of electrolyte/anode dual-layer hollow fibres for micro-tubular solid oxide fuel cells
An electrolyte/anode hollow fibre (HF) for micro-tubular solid oxide fuel cells (SOFCs), ie a
cerium–gadolinium oxide (CGO)/Ni–CGO dual-layer HF, has been developed in this study …
cerium–gadolinium oxide (CGO)/Ni–CGO dual-layer HF, has been developed in this study …
Micro-tubular solid oxide fuel cells fabricated by phase-inversion method
A novel structured micro-tubular solid oxide fuel cell (MT-SOFC) has been fabricated by
combining a phase-inversion, dip-coating and high temperature co-sintering process with …
combining a phase-inversion, dip-coating and high temperature co-sintering process with …
Morphological studies of macrostructure of Ni–CGO anode hollow fibres for intermediate temperature solid oxide fuel cells
In this study, Ni–CGO anodes hollow fibre with controlled asymmetric structures, ie
adjustable ratios between thickness of the outer sponge-like and the inner finger-like layers …
adjustable ratios between thickness of the outer sponge-like and the inner finger-like layers …