Hybrid perovskite FAPbI 3 is highly suitable candidate for photovoltaics. The major concerns
are dissolution and hazardous nature of 'Pb', which results in the major environmental …

Perovskite photovoltaics are attractive energy conversion device due to> 20% power
conversion efficiencies. However, these perovskite semiconductors are highly susceptible to …

Cu–Cr–O films were prepared by DC magnetron co-sputtering using Cu and Cr targets on
quartz substrates. The films were then annealed at temperatures ranging from 400° C to …

Cu–Cr–O films were co-sputtered from Cu and Cr targets on fused silica substrates. Then,
these films were annealed at 700° C for 2 h under controlled Ar atmosphere.[Cu]/[Cr] ratio …

Anisotropic CuCrO2 thin films were successfully prepared on glass substrate by the
electrospinning method followed by annealing at 600° C. The directionality of the nanowires …

In the literature data, several papers reported the synthesis by various chemical or physical
methods of the SrCu 2 O 2 (SCO) having possible applications in thermoelectric or …

Among the chemical methods in the liquid phase, the sol–gel technique is a versatile and
efficient method for pure or doped metal oxide films or powders preparation, showing some …

Anisotropic CuCrO2 thin films were successfully prepared on glass substrate by the
electrospinning method followed by annealing at 600◦ C. The directionality of the nanowires …

5 at.% Mg doped CuCrO2 films with different preferential growth orientations were grown on
different substrates,(0001) Al2O3,(001) YSZ,(001) SrTiO3 and quartz, by pulsed laser …

Anisotropic CuCrO 2 thin films were successfully prepared on glass substrate by the
electrospinning method followed by annealing at 600 C. The directionality of the nanowires …