This paper presents a systematic study of structure and mechanical behavior of Ti/Fe
explosive-bonded interfaces. The transient fluid-like behavior at the bonding zone is …

The paper presents a review of the literature and authors' research on the current
achievements in the field of extrusion of aluminium alloys, magnesium alloys, powders and …

A crystal-plasticity finite-element method was used to study the deformation behavior of a
commercially pure titanium Grade 1 sheet upon different strain paths. Prismatic slip …

This paper presented a systematic study of microstructure and mechanical properties of
Cu/Fe explosive-bonded interfaces. The periodic wavy bonding structure with both vortex …

Multi directional forging (MDF) is one of the severe plastic deformation methods utilized for
production of ultrafine grained materials with improved mechanical properties. The main …

The mechanical behaviors of commercially pure titanium (CP–Ti) sheets under uniaxial and
reverse loadings along various in-plane directions are investigated by crystal plasticity …

Direct comparisons between crystal plasticity simulations and experiments dedicated to test
a sample containing a small number of grains (oligocrystal), instrumented using full field …

The effect of solution treatment on the cavitation erosion behavior of a Fe-18Cr-16Mn-2Mo-
0.66 N high-nitrogen austenitic stainless steel (HNSS) exposed in distilled water up to 8 h …

This paper describes an application of a machine learning approach for parameter
optimization. The method is demonstrated for the elasto-viscoplastic model with both …

The anisotropic plasticity constants of the CPB06 criterion for Ti64, previously identified with
experiments performed in all three dimensions, are applied here to evaluate the effect of the …