A critical review and assessment for FRP-concrete bond systems with epoxy resin exposed to chloride environments
Fiber-reinforced polymer (FRP) composites have been widely used for retrofitting concrete
structures. Furthermore, increasing numbers of researchers are concerned about the use of …
structures. Furthermore, increasing numbers of researchers are concerned about the use of …
[HTML][HTML] Influence of curing, post-curing and testing temperatures on mechanical properties of a structural adhesive
Structural cold-curing adhesives are widely used to strengthen Reinforced Concrete (RC)
structures with Fibre Reinforced Polymers (FRPs). The performance of these adhesives, and …
structures with Fibre Reinforced Polymers (FRPs). The performance of these adhesives, and …
Experimental and numerical analysis of RC beams strengthened with ECC and stainless steel strips
Strengthening of reinforced concrete (RC) structures may be required for several reasons
and flexural strengthening of normal concrete (NC) beams is widely carried out using …
and flexural strengthening of normal concrete (NC) beams is widely carried out using …
Behavior of ECC columns confined using steel wire mesh under axial loading
Abstract Engineered Cementitious Composite (ECC) is a high-efficiency composite material
that possesses work-hardening behavior in addition to its multiple-cracking specifications. It …
that possesses work-hardening behavior in addition to its multiple-cracking specifications. It …
Effect of using ECC layer on the flexural performance of RC beams previously strengthened with EB CFRP laminates
M Emara, A El-Zohairy, M Fekry, M Husain - Sustainability, 2022 - mdpi.com
This paper studies the efficiency of applying an engineered cementitious composite (ECC)
layer to the tensile surface of (RC) beams that were previously strengthened using externally …
layer to the tensile surface of (RC) beams that were previously strengthened using externally …
Characterization and simulation of the bond response of NSM FRP reinforcement in concrete
The near-surface mounted (NSM) technique with fiber reinforced polymer (FRP)
reinforcement as strengthening system for concrete structures has been broadly studied …
reinforcement as strengthening system for concrete structures has been broadly studied …
[HTML][HTML] Performance of GFRP-Confined Rubberized Engineered Cementitious Composite Columns
In coastal regions, the deterioration of structures and bridges due to environmental
conditions and corrosion is a significant concern. To combat these issues, the use of …
conditions and corrosion is a significant concern. To combat these issues, the use of …
Multiscale viscoelastic analysis of FRP-strengthened concrete beams
A multiscale framework with an elastic reinforced concrete (RC) beam bonded to a fiber
reinforced polymer (FRP) plate (connected by an adhesive layer with viscoelastic properties) …
reinforced polymer (FRP) plate (connected by an adhesive layer with viscoelastic properties) …
[HTML][HTML] Experimental study and numerical prediction of the bond response of NSM CFRP laminates in RC elements under sustained loading
This paper presents a study into bond behaviour under sustained loading of Near-Surface
Mounted (NSM) Carbon-Fibre Reinforced Polymers (CFRP) concrete joints, through an …
Mounted (NSM) Carbon-Fibre Reinforced Polymers (CFRP) concrete joints, through an …
Bond behavior of the CFRP-concrete interface under combined sustained load and sulfate erosion
J Zhang, H Li, S Liu, X Zhang, C Yang, R Zhang - Structures, 2022 - Elsevier
The interface bonding between carbon fiber-reinforced polymer (CFRP) and concrete plays
a key role in the reinforcement of concrete structures using CFRP. However, in practical …
a key role in the reinforcement of concrete structures using CFRP. However, in practical …