Single-inductor multiple-output switching converters with time-multiplexing control in discontinuous conduction mode
An integrated single-inductor dual-output boost converter is presented. This converter
adopts time-multiplexing control in providing two independent supply voltages (3.0 and 3.6 …
adopts time-multiplexing control in providing two independent supply voltages (3.0 and 3.6 …
A pseudo-CCM/DCM SIMO switching converter with freewheel switching
This paper presents a single-inductor multiple-output (SIMO) converter operating in pseudo-
continuous conduction mode (PCCM) and/or discontinuous conduction mode (DCM). With …
continuous conduction mode (PCCM) and/or discontinuous conduction mode (DCM). With …
Total power optimization by simultaneous dual-Vt allocation and device sizing in high performance microprocessors
T Karnik, Y Ye, J Tschanz, L Wei, S Burns… - Proceedings of the 39th …, 2002 - dl.acm.org
We describe various design automation solutions for design migration to a dual-Vt process
technology. We include the results of a Lagrangian Relaxation based tool, iSTATS, and a …
technology. We include the results of a Lagrangian Relaxation based tool, iSTATS, and a …
Comparing performances of SIDO buck converters
G Nayak, S Nath - … on Power Electronics, Drives and Energy …, 2018 - ieeexplore.ieee.org
This paper compares two topologies of single input dual output (SIDO) buck converters. The
two topologies explored in literature for SIDO buck converters are based on the single …
two topologies explored in literature for SIDO buck converters are based on the single …
An integrated one-cycle control buck converter with adaptive output and dual loops for output error correction
An integrated adaptive-output switching converter is presented. This converter adopts one-
cycle control for fast line response and dual error correction loops for tight load regulation. A …
cycle control for fast line response and dual error correction loops for tight load regulation. A …
TNT digital pulse processor
L Arnold, R Baumann, E Chambit… - … on Nuclear Science, 2006 - ieeexplore.ieee.org
We report on the development of Tracking Numerical Treatment (TNT) boards, which are the
basic bricks of a more ambitious data acquisition system intended for online data acquisition …
basic bricks of a more ambitious data acquisition system intended for online data acquisition …
CAD for nanometer silicon design challenges and success
JT Kong - IEEE Transactions on Very Large Scale Integration …, 2004 - ieeexplore.ieee.org
As silicon CMOS technology is scaled into the nanometer regime, the paradigm shift of
computer-aided design (CAD) technology is indispensable to cope with two major …
computer-aided design (CAD) technology is indispensable to cope with two major …
System level power-performance trade-offs in embedded systems using voltage and frequency scaling of off-chip buses and memory
K Puttaswamy, KW Choi, JC Park… - Proceedings of the 15th …, 2002 - dl.acm.org
In embedded systems, off-chip buses and memory (ie, L2 memory as opposed to the L1
memory which is usually on-chip cache) consume significant power, often more than the …
memory which is usually on-chip cache) consume significant power, often more than the …
Using cross regulation in single-switch single-inductor dual-output CCM boost converter to simplify controller design
Cross regulation of single-inductor multiple-output (SIMO) boost dc/dc converter is usually
considered as a key factor that degrades the voltage regulation of individual outputs …
considered as a key factor that degrades the voltage regulation of individual outputs …
Digitally controlled integrated pseudo-CCM SIMO converter with adaptive freewheel current modulation
Y Zhang, D Ma - 2010 Twenty-Fifth Annual IEEE Applied Power …, 2010 - ieeexplore.ieee.org
In this paper, a digitally controlled integrated single-inductor multiple-output (SIMO)
converter operating in pseudo-CCM (PCCM) mode is presented. With an adaptive freewheel …
converter operating in pseudo-CCM (PCCM) mode is presented. With an adaptive freewheel …