Although indentation experiments have long been used to measure the hardness and
Young's modulus, the utility of this technique in analyzing the complete elastic–plastic …

Current phenomenological knowledge and understanding of mechanisms are reviewed for
radiation embrittlement of reactor pressure vessel low alloy steels and irradiation assisted …

A feasibility study was performed to fabricate ITER In-Vessel components by Selective Laser
Melting (SLM) supported by Fusion for Energy (F4E). Almost fully dense 316L stainless steel …

In recent years, high entropy alloys (HEAs) have attracted significant attention due to their
excellent mechanical properties and good corrosion resistance, making them potential …

Microstructures and mechanical properties are evaluated in austenitic stainless steel
structures fabricated by directed energy deposition (DED) considering the effects of applied …

In this work, the tensile behavior and microhardness of 316L stainless steel fabricated by
selective laser melting under different process parameters were investigated. The ultimate …

Abstract Stainless steel 316L (SS316L) vertical struts with various diameters ranging from
0.25 mm to 5 mm were manufactured by laser powder bed fusion (LPBF) process. A …

Pure tungsten samples have been neutron irradiated in HFIR at 90–850° C to 0.03–2.2 dpa.
A dispersed barrier hardening model informed by the available microstructure data has …

An analytic model describing substitutional solid solution strengthening in body-centered
cubic (BCC) complex, concentrated alloys (CCAs) based on a/2< 111> screw dislocation …

Development of new materials for current and advanced reactor concepts is hampered by
long lead times and high cost of reactor irradiations coupled with the paucity of test reactors …