A comprehensive surface roughness model is established to predict the average surface
roughness achieved by shear-thickening polishing (STP) based on calculation of Brinell …

The traditional devices, used to measure the surface roughness, are very sensitive, and they
are obtained by scratching the surface of materials. Therefore, the optic systems are used as …

Milled surfaces contain features of geometrically similar appearances under various
magnifications in different orientations. Fourier transform is useful in obtaining accurate …

The demand for high quality and fully automated production focuses attention on the surface
condition of the product, especially the roughness of the machined surface, because of its …

The general manufacturing objective during the fabrication of automotive components,
particularly through machining, can be stated as the striving to achieve predefined product …

The effect of surface roughness average of hypereutectic aluminum silicon alloys (with 16
wt% Si) on the friction and wear was investigated. Various surface roughness average (Ra) …

Due to its ability to remove material quickly while maintaining optimum surface quality, end
milling is considered one of the most frequent metal cutting procedures in industry. The …

The present study is an attempt to investigate the tribological behavior of friction stir
processing (FSP) AA6061-T6 alloy reinforced with boron carbide (B4C) particles. The …

3913 Experimental investigation on the performance of the TiO2 and ZnO hybrid nanocoolant in
ethylene glycol mixture towards AA6 Page 1 International Journal of Automotive and Mechanical …

Abstract INVAR-36 has 36% Ni resulting very low co-efficient of thermal expansion. Low co-
efficient of thermal expansion leads Invar-36 to be used in the applications where …