The demand for advanced materials such as silicon carbide particles reinforced copper
matrix composites (Cu-SiC) is increasing due to the stringent design requirement in the …

Titanium alloys are widely used in various areas, particularly in medical and dental
industries, due to their remarkable properties. Still, the optimum cutting conditions for …

Owing to the absence of scientific methods for predicting nanocomposites' wear rates, a
freshly updated machine learning method that uses an Artificial Protozoa Optimizer (APO) to …

The demands for high-performance biomaterials are driving the development of new
metallic alloys with improved mechanical and biological responses. In this study, a …

With the advancement of semiconductor technology, chip cooling has become a major
obstacle to enhancing the capabilities of power electronic systems. Traditional electronic …

Abstract Types and sizes of nanoparticles as the secondary phases of metal matrix
composites (MMCs) significantly affect their microstructures and mechanical properties. In …

In this paper, the rapid synthesis of nanostructured NiTi–Ni 3 Ti intermetallic alloy from
titanium and nickel powders through mechanical alloying followed by microwave-assisted …

Abstract Application of SiC reinforced Cu-based composites has been greatly limited by the
weak interfacial bonding strength between SiC and Cu matrix. In this work, the active …

To protect Nb substrate from oxidation at elevated temperatures and make better use of the
industrial solid wastes, spent MoSi 2 heating elements, ZrSi 2 and SiC were applied as raw …

Abstract Cu–Cr–Ti alloy was successfully prepared by vacuum melting, solution treatment at
960° C for 1 h, 80% cold rolling and aging at 500° C for 1 h. The effect of Ti content on the …