Reinforced concrete (RC) structures may confront with extreme loading conditions.
Sometimes, structures are not only under extreme loading such as earthquakes but also …

Nowadays, using infill isolators in Reinforced Concrete (RC) structures is very common. In
earlier research this infill isolators are usually considered as non-structural elements, but in …

In recent years, the issue of lower computational cost and analysis time has been the
important factors for the structural analysts. In the meantime, after years of its introduction as …

Currently, various methods have been used for repairing and retrofitting reinforced concrete
columns including Steel Fiber Reinforced Polymer (SFRP) jackets in order to improve load …

Structural and nonstructural members are always encountered with extreme loading
conditions. In case of nonstructural members, the failure happens much sooner due to lack …

One of the most useful way to resist against earthquake is using coupling beam of steel
shear walls. The steel shear wall's behavior depends on several factors such as stiffness …

Reinforced concrete is one of the most common structures in the world. These structures
may be under extreme loading conditions such as earthquake or they may confront with …

The type of lateral load capacity systems is one of the major challenges of structural
engineers in implementing and designing high-rise structures. One type of common systems …

The steel shear wall system has been considered as a structural system over the past few
decades. This issue deals with wind and earthquake lateral forces due to its hardness …

Due to the high seismicity of our regions, engineers have always sought to provide various
solutions to improve the performance of buildings and consequences control of powerful …