Liquid lead (Pb)-and lead–bismuth eutectic (LBE)-cooled fast neutron reactors (Gen-IV
LFRs) are one of the most technologically mature fission reactor technologies, due to their …

Adopting liquid metals as the working fluid, high temperature heat pipes (HTHPs) can
operate at a high temperature above 750 K and have extremely high heat transfer capacity …

The next generation of Concentrated Solar Power (CSP) plants are expected to operate at
higher temperatures than those currently in use, for improved efficiency and reduced cost of …

The United States Department of Energy (DOE) established the Concentrating Solar Power
Generation 3 (CSP Gen3) program to promote the development of advanced CSP systems …

Liquid metal embrittlement (LME) is the term for a collection of phenomena by which the
action of a liquid metal in contact with the surface of a solid metal results in the weakening …

Hot-dip Zn-coated high manganese twinning-induced plasticity (TWIP) steel is sensitive to
liquid metal embrittlement (LME). The microstructure of Zn-coated TWIP steel after brittle …

Significant advances in the study of liquid metal embrittlement have occurred since 2000 but
there have been few reviews of the liquid metal embrittlement literature since that time. This …

The oxidation resistance of 9 wt.% Cr heat resistance steel with silicon content ranging from
0 to 1.36 wt.% in 550° C lead-bismuth eutectic was investigated. The silicon content had little …

Grain boundary engineering (GBE) has lately been recognized as a viable approach to
manipulate grain boundary characteristics to improve resistance against intergranular …

The understanding and prediction of corrosion phenomena in liquid metal-cooled reactors is
very important for the performance assessment of the structural materials of the different …