A new ultrafast laser direct writing process to fabricate completely embedded silver mesh
flexible transparent electrodes (TEs) using sputtered silver thin films and their applications …

We demonstrate an all-solid-state deep-ultraviolet (DUV) laser based on the frequency-
quadrupling of a 1 µm, 1.2 ps, Yb: YAG Innoslab solid-state laser at a 10 kHz repetition rate …

The electric properties of ITO thin film after UV or IR laser annealing and wet etching was
analyzed via grazing incidence in-plane X-ray diffraction, scanning electron microscopy, X …

This study compares the ablation morphologies obtained with a femtosecond laser of both
Gaussian and quasi-flat top beam profiles when applied to indium tin oxide (ITO) thin films …

We demonstrate a 0.56-GW, 1-kHz, 4.2-ps, 2.74-mJ deep-ultraviolet (DUV) laser at∼ 257.7
nm with a beam propagation factor (M 2) of∼ 2.54 from a frequency-quadrupled cryogenic …

We present a comparative study of picosecond laser patterning of ITO thin films for OLED
applications using 355nm, 532nm and 1064nm radiation. Front side and rear side patterning …

In this paper, we present the selective structuring of all three patterns (P1, P2 and P3) of a
monolithic interconnection of CIS (Cu (In, Ga)(S, Se) 2) thin film solar cells by picosecond …

Indium tin oxide (ITO) thin films are deposited on glass substrates using a radio frequency
magnetron sputtering system. As-deposited ITO thin film was 100 nm in thickness and a …

Continuous growth of the thin-film electronics market stimulates the development of versatile
technologies for large-scale patterning of thin-film materials on rigid and flexible substrates …

We successfully demonstrate the generation of an all-solid-state deep-ultraviolet (DUV)
laser at 206 nm through the fifth (4+ 1)-harmonic generation using a 197-W, 10-kHz, 1.2-ps …