High-temperature membranes in power generation with CO2 capture
R Bredesen, K Jordal, O Bolland - Chemical Engineering and Processing …, 2004 - Elsevier
A survey is made of high-temperature membranes and several possible applications of
membrane reactors for integration in power generation cycles with CO2 capture. Current …
membrane reactors for integration in power generation cycles with CO2 capture. Current …
Nanoreinforced bacterial cellulose–montmorillonite composites for biomedical applications
Polymer composites containing solid clay nanoparticles have attracted immense attention
due to the reinforced physico-mechanical properties of the final product. Bacterial cellulose …
due to the reinforced physico-mechanical properties of the final product. Bacterial cellulose …
Fabrication and properties of low cost ceramic microfiltration membranes for separation of oil and bacteria from its solution
This work addresses the development of low cost ceramic microfiltration membrane from
inexpensive raw materials such as kaolin, quartz, calcium carbonate using uniaxial dry …
inexpensive raw materials such as kaolin, quartz, calcium carbonate using uniaxial dry …
Microporous inorganic membranes
Recent development in microporous inorganic membranes represents a significant advance
in materials for separation and chemical reaction applications. This paper provides an in …
in materials for separation and chemical reaction applications. This paper provides an in …
Structural and physico-mechanical characterization of bio-cellulose produced by a cell-free system
This study was aimed to characterize the structural and physico-mechanical properties of bio-
cellulose produced through cell-free system. Fourier transform-infrared spectrum illustrated …
cellulose produced through cell-free system. Fourier transform-infrared spectrum illustrated …
Fabrication and characterization of highly porous mullite ceramics
JH She, T Ohji - Materials chemistry and physics, 2003 - Elsevier
Highly porous mullite ceramics were fabricated by a reaction-bonding technique from a
powder mixture of Al2O3 and SiC, with graphite particles as the pore-forming agent. The …
powder mixture of Al2O3 and SiC, with graphite particles as the pore-forming agent. The …
Formation and characterization of supported microporous ceramic membranes prepared by sol-gel modification techniques
RSA De Lange, JHA Hekkink, K Keizer… - Journal of membrane …, 1995 - Elsevier
The formation is described of supported microporous membranes (by IUPAC definition
rpore< 1 nm), prepared by modification of mesoporous γ-alumina membranes with …
rpore< 1 nm), prepared by modification of mesoporous γ-alumina membranes with …
[KİTAP][B] Carbon dioxide capture for storage in deep geologic formations-results from the CO2 capture project: Vol 1-capture and separation of carbon dioxide from …
DC Thomas, SM Benson - 2005 - books.google.com
Over the past decade, the prospect of climate change resulting from anthropogenic CO2 has
become a matter of growing public concern. Not only is the reduction of CO2 emissions …
become a matter of growing public concern. Not only is the reduction of CO2 emissions …
A comparative study on thermal and hydrothermal stability of alumina, titania and zirconia membranes
CH Chang, R Gopalan, YS Lin - Journal of Membrane Science, 1994 - Elsevier
Thermal and hydrothermal stabilities of sol-gel derived γ-alumina, titania and zirconia
membranes have been investigated using comprehensive experimental data on the pore …
membranes have been investigated using comprehensive experimental data on the pore …
Green synthesis of low‐dimensional aluminum oxide hydroxide and oxide using liquid metal reaction media: ultrahigh flux membranes
Liquid metal reaction media provides exciting new avenues for synthesizing low‐
dimensional materials. Here, the synthesis of atomically thin sheets and nanofibers of …
dimensional materials. Here, the synthesis of atomically thin sheets and nanofibers of …