The softening behaviour during non-isothermal annealing of a cold-rolled Al–Mn–Fe–Si
model alloy was studied as a function of the state of microchemistry, in terms of the solute …

In this study, we examined the possibility for improving magnetic properties of Fe-Si-Cr soft
magnetic composite by the surface insulation through the selective oxidation annealing. To …

It is shown that, upon the rolling of a (110)[001] Fe-3% Si single crystal to different degrees
of deformation, special misorientations of types Σ3, Σ9, Σ11, Σ19a, Σ27a, Σ29b, and Σ33a …

The possibility of abnormal grain growth in grain-oriented Fe-3% Si steel by grain boundary
segregation was investigated. Yttrium was selected to inhibit normal grain growth because …

Low-temperature slab-reheated grain-oriented silicon steel is characterized by a sharp
{411}< 148> primary recrystallization texture. To date, the influence of this texture on …

Controlling the grain size of recrystallized grains during hot rolling is crucial in 6xxx
aluminum alloys used in automotive applications to avoid the development of roughness on …

In this study, the differences in the crystallographic orientation, grain size, and grain
boundary characteristic distribution along the sheet thickness in Si steel sheets were …

After the primary recrystallization of a preliminarily deformed (110)[001] single crystal, the
texture also has the preferred (110)[001] orientation. Furthermore, the texture contains weak …

Показано, что при прокатке монокристалла Fe 3% Si с ориентировкой (110)[001] c
различными степенями деформации, между элементами мезоструктуры …

Abstract Three-dimensional (3-D) Monte Carlo simulations of grain growth with sub-
boundaries in the presence of precipitates were performed based on the distribution of …