The austenite and ferrite microstructure evolution and softening mechanisms have been
investigated in a 21Cr–10Ni–3Mo duplex stainless steel, containing about 60% austenite …

The ferrite softening mechanisms in the austenite/ferrite microstructure have been
comprehensively examined as a function of the strain rate at a high deformation …

The occurrence of dynamic recrystallization in warm rolling of plain extra-low carbon steel
was examined by applying 75% thickness reduction in a single pass. The investigated …

The behaviour of plain carbon as well as structural steels is qualitatively different at different
regimes of strain rates and temperature when they are subjected to hot-working and impact …

Improving the mechanical properties of low carbon steel through the microstructural
refinement without adding alloying elements is a complicated scientific and technical …

The flow behaviour and microstructure characteristics of a ferritic stainless steel were
investigated using plain strain compression test on a Gleeble 3500 thermo-mechanical test …

In this paper, the effects of the heating temperature and holding time on the austenite grain
growth of SCM435 steel were studied and analyzed in terms of the average, macro-axis and …

In this study, a kind of heterogeneous structured dual-phase (DP) steels with micro-
laminated and ultrafine-grained microstructures are obtained via intercritical rolling followed …

The influence of the state of stress on the microstructure and dynamic recrystallization (DRX)
in a titanium-modified austenitic stainless steel is assessed by performing plane-strain and …

The austenite and ferrite microstructure evolution and restoration mechanisms were studied
during hot uniaxial compression of a 23Cr-6Ni-3Mo duplex stainless steel with two markedly …