Nanofluid application as the working fluid is proposed as a way for improving the solar
system performance. In this study, a dish concentrator with a cylindrical cavity receiver was …

Recently, a structurally-simple but compositionally-complex FeNiCoMnCr high entropy alloy
was found to have excellent mechanical properties (eg, high strength and ductility). To …

Creep-fatigue interaction behavior of nickel-based single crystal superalloy was studied in
an in-situ SEM platform at 900° C. Dwell times of 15, 30, 60, 90, 120 s were introduced at the …

Low cycle fatigue (LCF) and creep–fatigue testing of Ni-based alloy 617 was carried out at
850° C. Compared with its LCF life, the material's creep–fatigue life decreases to different …

Cross wedge rolling has been demonstrated as a new preforming process for superalloy
aero-engine blades, but the real application of it is limited by the precision regulation of …

Creep-fatigue (CF) response of HAYNES-282 as a function of dwell position and time, along
with corresponding deformation micro-mechanisms and failure modes are presented here …

This investigation determined the creep-fatigue cyclic-life (N f) saturation effect for the DZ445
superalloy with 16–128 min dwell time at 900° C and total strain range of 1.6%. When the …

The microstructure evolution and plastic deformation mechanism of Mg-6.58 Gd-5.7 Y-0.55
Zr alloy were investigated by uniaxial compression at temperatures ranging from 300° C to …

The charm of diffusion coatings is mainly in their protective function of the surface of gas
turbine components, which are often subjected to fatigue-creep loading in extremely hostile …

This investigation reports the results of the strain-controlled creep-fatigue behavior of
precipitation-strengthened directionally-solidified Nickel-based superalloy DZ445. The …