This review will present a comprehensive view of the field of stimuli-responsive healable
materials. It will begin with an examination of the healing of polymeric materials, briefly …

Composite materials are often subjected to mechanical impact causing delamination. For
quasi-static loading, measuring the mode I fracture toughness has been standardized …

A study of the healing of delamination damage in woven E-glass/epoxy composites is
performed. With the ultimate goal of self-healing in mind, two types of healing processes are …

Abstract 3D printing of continuous carbon fibre reinforced composites (CCFRC) based on
fused filament fabrication (FFF) has a great potential for reproducing robust and complex …

The mechanical properties of PEEK 150P polymer and APC-2 graphite/PEEK com posite
were measured at different crystallinities, from 0 to 40 weight percent. For PEEK 150P the …

Publisher Summary This chapter presents a wide range of experimental data, results, and
comments on the experiments, which determine the accuracy of current theories for …

This paper presents a survey of the current status of test methods for the measurement of
delamination resistance of composite materials, with particular emphasis on the work …

There is no proven scaling law for reliably predicting the damage tolerance of brittle
composite structures based on the results of laboratory coupon testing. Tests were …

A detailed study on the interlaminar failure of carbon-fibre/poly (ether-ether ketone)
unidirectional composite (termed PEEK composite:" APC-2" from ICI (UK) plc) is presented …

Composite materials often fail by delamination. As composite materials with tougher
matrices are developed to give better delamination resistance, their delamination behavior …