[HTML][HTML] Effect of ultra-fast high-intensity light-curing on the properties of a new bulk-fill restorative resin composite system: A Sco** Review
SB Miranda - Journal of Clinical and Experimental Dentistry, 2024 - pmc.ncbi.nlm.nih.gov
Background This sco** review aims to analyze the impact of rapid high-intensity light-
curing on a new bulk-fill resin-based composites (RBCs) designed for this type of …
curing on a new bulk-fill resin-based composites (RBCs) designed for this type of …
Effect of pre-heating methods and devices on the mechanical properties, post-gel shrinkage, and shrinkage stress of bulk-fill materials
This study evaluated the effect of using two different pre-heating methods on the three resin-
based composite (RBCs). Three paste viscosity bulk-fill RBCs (VisCalor Bulk [VC]; VOCO; x …
based composite (RBCs). Three paste viscosity bulk-fill RBCs (VisCalor Bulk [VC]; VOCO; x …
[HTML][HTML] Thermography and conversion of fast-cure composite photocured with quad-wave and laser curing lights compared to a conventional curing light
Objectives This study investigated effects of the different emittance-mode protocols from
three light curing units (LCUs):(i) a Laser (Monet);(ii) a quad-wave (PinkWave);(iii) a …
three light curing units (LCUs):(i) a Laser (Monet);(ii) a quad-wave (PinkWave);(iii) a …
[HTML][HTML] Temperature rise in photopolymerized adhesively-bonded resin composite: A thermography study
Objectives To assess visually and quantitatively the contributions of the adhesive layer
photopolymerization and the subsequent resin composite increment to spatio-temporal …
photopolymerization and the subsequent resin composite increment to spatio-temporal …
Temperature changes and hardness of resin-based composites light-cured with laser diode or light-emitting diode curing lights
Abstract The temperature and Vickers Hardness (VH) at the top and bottom surfaces of three
resin-based composites (RBCs) were measured when light-cured using five light-curing …
resin-based composites (RBCs) were measured when light-cured using five light-curing …
[HTML][HTML] Polymerization and shrinkage kinetics and fracture toughness of bulk-fill resin-composites
Objectives To determine degree of conversion (DC), maximum polymerization rate (RP
max), polymerization shrinkage (PS), maximum shrinkage rate (PS R max) and fracture …
max), polymerization shrinkage (PS), maximum shrinkage rate (PS R max) and fracture …
Various ways of pre-heating a bulk-fill thermoviscous composite in restoration in non-carious cervical lesions: 12-month randomized clinical trial
MW Favoreto, T de Souza Carneiro… - Clinical Oral …, 2023 - Springer
Objective The objective of the study is to evaluate through a randomized clinical trial the best
method to preheat a composite resin, if using a Caps dispenser device associated with Caps …
method to preheat a composite resin, if using a Caps dispenser device associated with Caps …
Impact of ultra-fast (3 s) light-cure on cell toxicity and viscoelastic behavior in a dental resin-based composite with RAFT-mediated polymerization
N Ilie, J Diegelmann - Journal of the Mechanical Behavior of Biomedical …, 2021 - Elsevier
Objective The aim of the study was to determine the effects of ultra-fast (3 s) light-curing on
the viscoelastic behaviour at clinically relevant frequencies, and cell toxicity, in a resin …
the viscoelastic behaviour at clinically relevant frequencies, and cell toxicity, in a resin …
[HTML][HTML] Diversity of short-term DC outcomes in bulk-fill RBCs subjected to a 3 s high-irradiance protocol
Objectives To determine the short-term (5 min) initial effects of a high-irradiance light-curing
(LC) protocol on light transmission (LT%), radiant exposure (RE) and degree of conversion …
(LC) protocol on light transmission (LT%), radiant exposure (RE) and degree of conversion …
Clinical performance of preheating thermoviscous composite resin for non-carious cervical lesions restoration: A 24-month randomized clinical trial
MW Favoreto, T de Souza Carneiro… - Journal of Dentistry, 2024 - Elsevier
Abstract Objectives This 24-month, double-blind, split-mouth randomized clinical trial aimed
to compare the retention rates of a preheated thermoviscous composite resin (PHT) …
to compare the retention rates of a preheated thermoviscous composite resin (PHT) …