Polyaryletherketone (PAEK) is emerging as an important high‐performance polymer
material in additive manufacturing (AM) benefiting from its excellent mechanical properties …

Process-induced deformation (PID) is unavoidable during thermosetting composite
manufacturing, and the PID may reduce the assembly accuracy and even cause a service …

Fused filament fabrication (FFF), as one of the most commonly used additive manufacturing
(AM) technology, draws lots of attention in fabrication of polymer-based materials because of …

The highly versatile fused filament fabrication (FFF) allows on-demand manufacturing of
carbon fiber reinforced plastics (CFRP) structures with intricate geometries. However, the …

Abstract Development of high performance polyether-ether-ketone (PEEK)) composites is of
great significance for aerospace engineering application. The fused filament fabrication …

This study investigates the influence of temperature on the mechanical and fracture
properties of carbon fiber reinforced (CF) polyetheretherketone (PEEK) composites, with a …

Functionally Graded Materials represent the next generation of engineering design for metal
and plastic components. In this research, a specifically modified and optimised 3D printer …

Due to the addition of short/continuous fibers with better mechanical properties, FDM 3D-
printed short-and continuous-fiber-reinforced PEEK composites possess better performance …

The mechanical properties of carbon fiber-reinforced polyether-ether-ketone (CF/PEEK)
composites are closely related to the fiber content. However, the low fiber content (typically …

The major challenge restricting the application of 3D printed PEEK parts is the weak
interlayer strength. Herein, the fluorene-based poly (ether ether ketone) s (FD-PEEK) were …