Thermal oxidation, which serves as a low-cost, effective and relatively simple/facile method,
was used to modify a micro-structured titanium surface in ambient atmosphere at 450° C for …

Titanium (Ti) and its alloys have been extensively applied in various fields of chemical
industry, marine, aerospace and biomedical devices because of a specific combination of …

The surface of solids is characterized by active, energy-rich sites that determine
physicochemical interaction with gaseous and liquid media and possible applications in …

It is a substantial challenge to prepare high-performance high-entropy carbides at low
temperature. In this study, a system of (Hf 0.2 Mo 0.2 Nb 0.2 Ta 0.2 Ti 0.2) C high-entropy …

Six types of micro-textures with different diameters and area densities are produced on the
surfaces of the TC11 alloy. The wear characteristics of the textured and untextured surfaces …

The paper presents research on estimating concentrations and distribution of rutile and
anatase on the surface and cross-section of TiO 2 thin layers by Raman imaging. The TiO 2 …

Designing single-phase ceramics with favorable self-lubricity is a substantial challenge due
to the strong chemical bonds and difficulty to shearing. Most conventional lubricating …

TiN-doped Sialon matrix composites are potential candidates for high temperature
applications due to their excellent mechanical and tribological properties. The objectives of …

By anodization and thermal oxidation at 600° C, an oxide layer on Ti with excellent corrosion
resistance in strong acid solutions was prepared. The structural properties of TiO2 films …

It is an enormous challenge to develop single‐phase ceramics with satisfactory self‐lubricity
because of the strong chemical bonding and difficult to shearing. In this study,(Hf0. 2X0 …