Abstract Al-Mg-Si alloys with high strength and good corrosion resistance are regarded as
desirable materials for all-aluminum vehicles. However, the traditional trial-and-error …

In this study, the microstructure and mechanical properties of the commercial magnesium
(Mg) ZK60 alloy were conducted to promote the application of Mg alloys. Scanning electron …

Abstract The 2195 Al-Cu-Li alloy is widely utilized for the fabrication of key aerospace
vehicle components; hence, an in-depth understanding of its hot deformation behavior is …

The intrinsic correlation between dynamic precipitation and Dynamic Recrystallization
(DRX) in a rare earth (RE)-free engineering Mg-4Sn-3Al-1Zn (TAZ431, wt.%) magnesium …

Abstract 2195 Al-Li alloy is one of the most important structural materials in the aerospace
industry in recent years because of its advantages, such as low density, high strength, good …

The evolution of microstructure and δ phase (Ni 3 Nb) in an aging-treated nickel-based
superalloy is studied by hot compression tests. Combining with the detailed microstructure …

Hot tensile features of a commercial 7046 aluminum alloy are investigated through
employing high-temperature tensile tests. The evolving mechanisms of microstructures over …

Friction rolling additive manufacturing (FRAM) is a solid-state additive manufacturing
technology that plasticizes the feed and deposits a material using frictional heat generated …

The common problem of low strength-ductility matching prevails in near-α high-temperature
titanium matrix composites (TMCs). In this work, the design strategy of ultrafine grains and …

The hot deformation behavior and the associated microstructural evolution (which were the
keys to decide mechanical properties) were studied using different deformation conditions …