Bifacial solar photovoltaics (PV) is a promising mature technology that increases the
production of electricity per square meter of PV module through the use of light absorption …

We present an investigation of the electrical characteristics–recombination and contact
resistance–of poly-crystalline (poly) Si/mono-crystalline (c) Si junctions and of the influence …

This paper reports on the implementation of carrier‐selective tunnel oxide passivated rear
contact for high‐efficiency screen‐printed large area n‐type front junction crystalline Si solar …

A big challenge to improve the conversion efficiency of n-type solar cell is the recombination
and electrical contacting of boron (B)-doped emitters in n-TOPCon solar cells. This work …

An overview of the Passivated Emitter and Rear Totally Diffused (PERT) solar cell is
presented, which is a member of Passivated Emitter and Rear Contact (PERC) family. Due …

Copper‐plated interconnects were widely adopted for volume manufacture of integrated
circuits after more than a decade of intensive research to demonstrate that use of Cu would …

Bifacial crystalline silicon (c-Si) solar cells have currently attracted much attention due to the
front high-efficiency and additional gain of power generation from the back side. Here, we …

High-efficiency silicon solar cells rely on some form of passivating contact structure to
reduce recombination losses at the crystalline silicon surface and losses at the metal/Si …

For the contacting of boron-doped emitters with screen-printed metallization in n-type silicon
solar cells, usually a small amount of aluminum is added to the silver pastes. To date, low …

Solar cells with polysilicon-based passivating and carrier selective contacts are in the
nascent stages of industrialization. Advances in commercially available metallization pastes …