Effect of Anodization Time on the Adhesion Strength of Titanium Nanotubes Obtained on the Surface of the Ti–6Al–4V Alloy by Anodic Oxidation
In this work, titanium oxide nanotubes (TNTs) were formed by anodic oxidation on the
surface of a Ti–6Al–4V alloy. An electrolyte based on ethylene glycol (EG) and ammonium …
surface of a Ti–6Al–4V alloy. An electrolyte based on ethylene glycol (EG) and ammonium …
Synthesis of bioactive TiO2 nanotubular thin films: Exploring biocompatibility and biocorrosion behavior in simulated body environments
AP Simon, BL da Silva, EF Belusso… - Surface and Coatings …, 2023 - Elsevier
Nanotexturization of the surface of metallic implants has been a promising strategy for
enhancing their performance but is obtained in relatively long anodization periods (> 1 h) …
enhancing their performance but is obtained in relatively long anodization periods (> 1 h) …
Plasma electrolytic oxidation up to four-steps performed on niobium and Nb-Ti alloys
Plasma electrolytic oxidation (PEO) of up to four steps were performed on Niobium (Nb), and
binary Niobium-Titanium alloys (Nbx-Ti, x= 50%, 90 wt.%), and the resulting oxidized …
binary Niobium-Titanium alloys (Nbx-Ti, x= 50%, 90 wt.%), and the resulting oxidized …
Influence of micro and nanoporous TiO2 surface modifications on physical-chemical and biological interactions
Titanium is widely used in implants but can cause adverse reactions like inflammation and
tissue rejection. Surface modifications like acid-etching and anodization improve implant …
tissue rejection. Surface modifications like acid-etching and anodization improve implant …
Multi-step cefazolin sodium release from bioactive TiO2 nanotubes: Surface and polymer coverage effects
Bacterial implant-related infections have been pointed out as the leading cause of metal
implant failure. Recently, nanotexturization of biomaterials surface associated with antibiotic …
implant failure. Recently, nanotexturization of biomaterials surface associated with antibiotic …
TiO2NTs bio-inspired coatings: revisiting electrochemical, morphological, structural, and mechanical properties
By altering some synthesis variables, the morphology and structural properties of anodic TiO
2 nanotube arrays (TiO 2 NTs) can be tailored to a specific application. This study aims to …
2 nanotube arrays (TiO 2 NTs) can be tailored to a specific application. This study aims to …
Nanostructured TiO2-X/CuXO-based electrochemical sensor for ultra-sensitive glyphosate detection in real water samples
Glyphosate, a widely employed non-selective pesticide for enhancing crop productivity
through weed control, poses significant health and environmental concerns due to its …
through weed control, poses significant health and environmental concerns due to its …
Optimization of TiO2 coatings properties and photochemical Ag-functionalization: Implications on bioactivity and antibacterial activity
Titanium-based implants are widely used in implant manufacture. However, the low bone-
implant contact and infections are still potential complications. To pursue the development of …
implant contact and infections are still potential complications. To pursue the development of …
Formation of CuOx Nanowires by Anodizing in Sodium Bicarbonate Solution
Mechanism of copper nanostructuring by oxides and hydroxide formation during anodizing
is not fully understood. At the same time, the search for novel copper anodizing regimes and …
is not fully understood. At the same time, the search for novel copper anodizing regimes and …
Effluent toxicity study using biomarkers for ciprofloxacin photoelectrocatalytic degradation by bismuth-doped titanium dioxide nanotubes
EM Oliveira, A Rodrigues, JS Santos… - Environmental …, 2024 - Taylor & Francis
Ciprofloxacin hydrochloride (CIP) is a broad-spectrum synthetic antibiotic often found in
domestic sewage and industrial waste due to the inefficiency of conventional treatments …
domestic sewage and industrial waste due to the inefficiency of conventional treatments …