In this paper, the effect of continuous and pulsed current in the gas tungsten arc welding
(GTAW) on the various properties of an AISI 316L stainless steel joints was investigated …

In this investigation, dissimilar welded joints of AISI 316 L and AISI 310S stainless steels
were produced using continuous and pulsed modes current of the gas tungsten arc welding …

This research work explore the weldability, structural integrity, mechanical properties and
corrosion behaviour of dissimilar welds of Inconel 718 and AISI 430 developed by using …

The need for a more sustainable and accessible source of energy is increasing as human
society advances. The use of different metallic materials and their challenges in current and …

Abstract In this study,(Co 1.5 FeNi) 88.5 Ti 6 Al 4 R 1.5 (R= Hf, W, Nb, Ta, Mo, V) high
entropy alloys were fabricated by vacuum arc melting, followed by cold rolling and aging …

The deformation behavior and microstructure characteristics of laser-welded Ti-6Al-4V
titanium alloy joints under variable amplitude fatigue ranging from 320 to 380 MPa (initial …

The novel cryogenic high-Mn austenitic steel weld metal with four different cerium (Ce)
contents were prepared under submerged arc welding by adding cerium dioxide and …

The aim of the present study is to investigate the effect of accumulative roll bonding (ARB)
and precipitation hardening on the microstructure development and there of mechanical …

Abstract Wire Arc Additive Manufacturing (WAAM) as an emerging process to fabricate and
repair big objects. In this investigation, thin-walled 316L Stainless steel parts were deposited …

This research focuses on the effect of heat input of super duplex stainless steel (sDSS 2507)
and nitronic steel (N50) dissimilar welded joints. Two heat input combinations selected as …