The viscosity of molten metals is a critical parameter influencing melt fluidity, alloy forming
quality, and casting performance. It is therefore essential to maintain melt viscosity within an …

Viscosity is an important rheological property of metals in casting because it controls the rate
of transport of liquid metals, which may lead to casting defects such as hot tearing and …

A simple and completely predictive model has been developed to predict whether a
multicomponent equiatomic alloy will form a single phase BCC, FCC, HCP or a combination …

Solidification experiments were carried out for Al-Bi alloys with the addition of TiC. It is
demonstrated that the average size of the Bi-rich minority phase particles (MPPs) shows a …

Density and viscosity of Ni–Ti melts were measured under high-vacuum conditions using an
electrostatic levitation technique. The density of Ni–Ti melts can be expressed as a linear …

In this work, an experimental study was conducted to show the effect of Ga addition to Bi-Ga
alloys on density, surface tension, and viscosity. The thermophysical properties of the Bi-Ga …

The comparative analysis of experimental and calculated viscosity of binary alloys was
performed applying models in which enthalpy or free enthalpy of mixing change is combined …

Liquid metals are very attractive coolants for micro-channel heat sinks with a high heat flux.
However, whether liquid metals can achieve a better cooling performance than water in …

Air is considered as the feasible internal coolant to cool the vane of the gas turbines for the
conventional cooling method all the time. However, the traditional cooling method gradually …

Viscosity and diffusivity, two important transport coefficients, are systematically investigated
from unary melt to binary to multicomponent melts in the present work. By coupling with …