Steel matrix particulate composites were processed by direct addition of various powders to
molten medium carbon steel. Fe–TiC and Fe–TiB2 powders were produced using a self …

Due to the increasing industrial interest in TiB2 the present work was accomplished to
establish various solid-state properties of TiB2 and to study the influence of sintering aids …

抄録< jats: title> Abstract</jats: title>< jats: p> The article contains sections titled:</jats: p><
jats: p>< jats: table-wrap position=" anchor">< jats: table frame=" void">< jats: col width=" …

Sintering of TiB 2-hardmetals with ferrous binders results in the formation of parasitic Fe 2 B
which consumes a good part of the ductile binder. Besides Fe 2 B, Ti 2 O 3 is formed during …

Iron-rich alloys in the Fe–Ti–B system are being studied for their potential as a new
generation of lightened steel-matrix composites reinforced by titanium diborides. In this …

TiB2–Cu interpenetrating phase composite materials (IPC) are prepared by combustion
synthesis with elemental titanium, boron and copper powders. The synthesized product …

Laurent Ottavi*, Catherine Saint-Jours**, Nicole Valignant ** and Colette H. Allibert" Page 1 L.
Ottavi et al.: Phase Equilibria of Fe – Ti – B Alloys C Carl Hanser Verlag, München 1992 Laurent …

A deep knowledge of phase relationships involving a liquid phase is of critical interest in
solidification process. If chemically active elements are involved, the conditions under which …

The densification behaviour of several different pure TiB 2 and metaldoped TiB 2 powders
was investigated through hot pressing and gas pressure sintering. The type (Fe, Ni, Co) and …

A new fabrication route, an alternative to glass encapsulated hip** (GEHIP), has been
developed to produce dense TiB2 cermets. Key points of this technique, based on hip** …