Microbiologically influenced corrosion (MIC) of 2205 duplex stainless steel (DSS) in the
presence of Pseudomonas aeruginosa was investigated through electrochemical and …

Grain boundary engineering (GBE) can effectively improve the corrosion resistance of
materials, but the traditional thermal-mechanical process still exhibits some limitations. In the …

The pitting corrosion resistance of duplex stainless steel welds was investigated. Pitting
corrosion mainly occurs in high-temperature heat-affected zone (HT-HAZ), where the peak …

In this study, the evolution of microstructure and its correlation with hardness and pitting
corrosion resistance in duplex stainless steel (DSS) welded joints were investigated. The …

In this work, the role of prior plastic deformation and rate of deformation on the corrosion
behavior of plastically-deformed metastable AISI 321 austenitic stainless steel in 3.5 wt …

In the present work, the influence of a corrosive environment and temperature on the
corrosion resistance properties of duplex stainless steel S31803 was evaluated. The …

Duplex stainless steel multi-pass welds were made at 0.15 MPa, 0.45 MPa, and 0.75 MPa
pressure, simulating underwater dry hyperbaric welding by the flux-cored arc welding …

In this paper, the microstructure and pitting corrosion resistance of S32101 duplex stainless
steel keyhole tungsten inert gas welded joints with different heat inputs were studied. The …

Aiming to better understand the effects of heat treatment parameters on Ferrite-Austenite
phase transformation in a 2304 duplex stainless steel different thermal cycles were applied …

Duplex stainless steel owns its denomination to the combination of two types of phases,
ferritic and austenitic, whose main characteristic is the excellent resistance to corrosion in …