With the aim to provide the structural design stage with data on the crack retardation/
acceleration effects caused by overload/underload and to explore the corresponding …

A series of fatigue crack growth experiments on Q345R steel are conducted by a constant
amplitude load with a single overload/underload. The fatigue crack growth behavior of …

The fatigue and crack growth behavior of Inconel 718 and AL6XN alloys joined with an
ERNiFeCr-2 filler by the gas tungsten arc welding process was evaluated. A comparison …

Corrosion fatigue crack growth (CFCG) experiments of AISI 4340 high strength steel were
conducted using pre-cracked compact tension specimens in dry air, distilled water, and …

This paper deals with online controlled propagation and vibration-based detection of fatigue
cracks in metal beams constituted of two different materials: 6082-T651 aluminium alloy and …

To consider the acceleration effect induced by the underloads in the design stage, the
fatigue crack growth rates in S355 steel were measured based on the compliance method …

Purpose The purpose of this paper is to investigate the fatigue crack growth (FCG) under
random loading using analytical methods. Design/methodology/approach For this purpose …

A series of fatigue crack growth experiments were conducted using round compact tension
specimens of AISI 304L stainless steel under Mode I loading. The influences of the R-ratio …

An experimental investigation was conducted on the fatigue crack growth (FCG) behavior of
an extruded AZ31B magnesium (Mg) alloy in ambient air. Compact tension (CT) specimens …

Natural aging and variable amplitude loading are very common for structural parts subjected
to fatigue loading. In this paper, ultrasonic frequency fatigue tests without intermittence were …