[HTML][HTML] Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
There are several facets of aluminum when it comes to sustainability. While it helps to save
fuel due to its low density, producing it from ores is very energy-intensive. Recycling it shifts …
fuel due to its low density, producing it from ores is very energy-intensive. Recycling it shifts …
Structure and mechanical behavior of in situ developed Mg 2 Si phase in magnesium and aluminum alloys–a review
The demand for lightweight, high specific strength alloys has drastically increased in the last
two decades. Magnesium and aluminum alloys are very suitable candidate materials …
two decades. Magnesium and aluminum alloys are very suitable candidate materials …
[HTML][HTML] Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys
This study introduces new alloys, which combine the age-hardening capability of Al-Mg-Si
alloys with the microstructure-controlling effect on processing of primary Fe-rich intermetallic …
alloys with the microstructure-controlling effect on processing of primary Fe-rich intermetallic …
[HTML][HTML] Effect of high pressure die casting on the castability, defects and mechanical properties of aluminium alloys in extra-large thin-wall castings
The manufacturing of extra-large thin-wall castings using high pressure die casting is one of
the most significant challenges for structural applications requiring excellent ductility. The …
the most significant challenges for structural applications requiring excellent ductility. The …
Revealing the influence of Fe on Fe-rich phases formation and mechanical properties of cast Al-Mg-Mn-Fe alloys
In this study, the recycled Al-Mg-Mn-Fe alloys having different Fe levels (0.1%, 0.5%, and
0.8%) were successfully developed by applying squeeze casting without heat treatment …
0.8%) were successfully developed by applying squeeze casting without heat treatment …
[HTML][HTML] Development of aluminium-based composites reinforced with steel and graphite particles: structural, mechanical and wear characterization
Apparent limitations in toughness and ductility of ceramic reinforced aluminium matrix
composites have prompted considerations of metallic reinforcements. In the present study …
composites have prompted considerations of metallic reinforcements. In the present study …
New generation of eutectic Al-Ni casting alloys for elevated temperature services
Al-Ni alloys are promising aluminum alloys for high-temperature applications because of
their many good properties partly due to the high stability of the Al 3 Ni eutectic fibers at …
their many good properties partly due to the high stability of the Al 3 Ni eutectic fibers at …
High strength and ductility aluminium alloy processed by high pressure die casting
A high strength (Yield strength≥ 320 MPa) and high ductility (Tensile elongation≥ 10%) die–
cast aluminium alloy was first developed. The AlSiCuMgMn alloy processed by high …
cast aluminium alloy was first developed. The AlSiCuMgMn alloy processed by high …
Improvement in as-cast strength of high pressure die-cast Al–Si–Cu–Mg alloys by synergistic effect of Q-Al5Cu2Mg8Si6 and θ-Al2Cu phases
A novel high-strength die-cast Al–Si–Cu–Mg alloy has been developed in the present work.
Experimental results indicated that the combination of different amounts of θ-Al 2 Cu and Q …
Experimental results indicated that the combination of different amounts of θ-Al 2 Cu and Q …
Exploring crystal structures, stability and mechanical properties of Fe, Mn-containing intermetallics in Al-Si Alloy by experiments and first-principles calculations
Separation of Fe-containing intermetallics is an effective method to decrease Fe content in
Al-Si alloys. Regular morphology and higher precipitation temperature are necessary for …
Al-Si alloys. Regular morphology and higher precipitation temperature are necessary for …