Dependence of CZTS thin film properties and photovoltaic performance on heating rate and sulfurization time
In this study, effect of heating rate and sulfurization time on the properties of CZTS thin films
and their photovoltaic performances was investigated. CZTS layers were prepared by a two …
and their photovoltaic performances was investigated. CZTS layers were prepared by a two …
A review of recent advances of kesterite thin films based on magnesium, iron and nickel for photovoltaic application: insights into synthesis, characterization and …
NM Espinel Pérez, E Vera López… - Clean …, 2024 - academic.oup.com
This review emphasizes the recent advancements and prospects of thin-film kesterite-based
photovoltaic (PV) applications using magnesium, iron and nickel. The quest for novel …
photovoltaic (PV) applications using magnesium, iron and nickel. The quest for novel …
Effect of post annealing thermal heating on Cu2ZnSnS4 solar cells processed by sputtering technique
In this work, a detailed study of the effect of thermal treatment (hot plate) on a
Mo/CZTS/CdS/i-ZnO/ITO solar cell was carried out, which promotes the diffusion of the Cd …
Mo/CZTS/CdS/i-ZnO/ITO solar cell was carried out, which promotes the diffusion of the Cd …
Impact of stacking order and annealing temperature on properties of CZTS thin films and solar cell performance
Abstract In this study, Cu 2 ZnSnS 4 (CZTS) thin films were synthesized by a two-stage
process. In the first stage, CuSn/Zn/Cu (E-type) and CuSn/ZnS/Cu (B-type) stacked films …
process. In the first stage, CuSn/Zn/Cu (E-type) and CuSn/ZnS/Cu (B-type) stacked films …
Scalable and universal route for the deposition of binary, ternary, and quaternary metal sulfide materials from molecular precursors
A range of binary, ternary (CFS), and quaternary (CZTS) metal sulfide materials have been
successfully deposited onto the glass substrates by air-spray deposition of metal …
successfully deposited onto the glass substrates by air-spray deposition of metal …
Fabrication of Cu-rich CZTS thin films by two-stage process: Effect of gas flow-rate in sulfurization process
In this study, CZTS thin films were prepared using a two-stage process consisting of sputter
deposition of Cu, Sn and ZnS layers on the glass substrates to form CuSn/ZnS/Cu stacked …
deposition of Cu, Sn and ZnS layers on the glass substrates to form CuSn/ZnS/Cu stacked …
Impact of sulfurization parameters on properties of CZTS thin films grown using quaternary target
In this study, CZTS thin films were grown by annealing of sputtered films using quaternary
single target employing various annealing parameters. The effects of the post-sulfurization …
single target employing various annealing parameters. The effects of the post-sulfurization …
Cu2ZnSnS4 films properties deposited by spray pyrolysis, subjected to a combined novel thermal treatment: CSS sulfurization and RTA post-treatment
VD Moreno-Regino, R Castanedo-Pérez… - Journal of Alloys and …, 2023 - Elsevier
CZTS films were obtained by spray pyrolysis, a low-cost technique implemented on an
industrial scale. Sulfurization processes generally enhance CZTS properties for its use in …
industrial scale. Sulfurization processes generally enhance CZTS properties for its use in …
Spectroscopy and Theoretical Modeling of Phonon Vibration Modes and Band Gap Energy of Cu2ZnSn(SxSe1–x)4 Bulk Crystals and Thin Films
Semiconductor Cu2ZnSn (S x Se1–x) 4 (CZTSSe) solid solution is considered as a
perspective absorber material for solar cells. However, during its synthesis or deposition …
perspective absorber material for solar cells. However, during its synthesis or deposition …
The choice of Zn or ZnS layer in the stacked precursors for preparation of Cu2ZnSnS4 (CZTS) thin films
Abstract Cu 2 ZnSnS 4 (CZTS) thin films are commonly used as an absorber layer in the thin
film solar cell structure. In this study, CZTS thin films were produced by sulfurization of …
film solar cell structure. In this study, CZTS thin films were produced by sulfurization of …