The objective of this work is to investigate the effect of heat treatment on swelling, hardness
and surface quality of samples from four species, namely mindi (Melia azedarch L.) …

Bamboo culms of Dendrocalamus strictus (Roxb.) were subjected to thermal modification at
different treatment temperatures of 160, 180 and 200° C under partial vacuum. Control and …

In this study, the change in the chemical properties of the thermally modified eucalyptus
(Eucalyptus camaldulensis) wood boards were examined by wet chemical analysis and …

The effects of short-term thermomechanical (STTM) densification temperature and pressure
on the changes in surface roughness, wettability, mass loss (ML), thickness and density of …

Thermo-mechanical densification of wood is performed to improve physical and mechanical
properties of wood. During this treatment aesthetic properties of wood, including gloss, also …

Due to the advantages of short treatment period, no wastewater and oil produced, the CO 2
laser is applied as an environment friendly thermal treatment for wood materials to improve …

In this study, the effects of veneer thickness, the combination of different veneer thicknesses
as well as non-densified and densified veneers with the same plywood structure, and …

The objective of this research was to investigate the wettability and surface roughness
properties of the plywood panels under thermal modification. The plywood panel specimens …

The aim of this study was to investigate the effect of the thermal modification process by hot-
press on the wettability and surface roughness characteristics of the eucalyptus wood …

In this study the properties of plywood manufactured from densified and non-densified
veneer sheets and alternate layers of such veneers with and without densification using low …