Undoubtedly, a better understanding and the further development of approaches for
damage tolerant component design of AM parts are among the most significant challenges …

Abstract Miniaturized Tensile Test (MTT), as an important type of Small Specimen Test
Technology (SSTT), has gained increasing attentions in the nuclear industry and other …

Pure tungsten samples have been neutron irradiated in HFIR at 90–850° C to 0.03–2.2 dpa.
A dispersed barrier hardening model informed by the available microstructure data has …

Abstract 316L stainless steel fabricated by laser powder-bed fusion (LPBF) has attracted
significant attention due to a unique combination of strength and ductility at room …

In situ tensile tests, accompanied by scanning electron microscopy coupled with electron
backscatter diffraction (EBSD) analyses were performed on neutron-irradiated 304L steel …

The development and understanding of the mechanical properties of neutron-irradiated
FeCrAl alloys is increasingly a critical need as these alloys continue to become more mature …

There is considerable interest in the adoption of additive manufacturing for processing
refractory metals. The layer-wise fabrication approach enables opportunities for producing …

Abstract Iron-chromium-aluminum (FeCrAl) alloys are promising as corrosion-and oxidation-
resistant materials for high-temperature applications. However, further design and …

Complex metallic structures are often manufactured through multi-step forming or casting
processes that induce severe mechanical property variations within the final part. Instead of …

High deposition rate additive manufacturing (AM) processes with minimal feedstock costs
are desirable to reduce part fabrication times and minimize the cost of implementation. Wire …