Biomass-derived syngas production via gasification process and its catalytic conversion into fuels by Fischer Tropsch synthesis: A review
RG dos Santos, AC Alencar - International Journal of Hydrogen Energy, 2020 - Elsevier
Abstract The Fischer–Tropsch (FT) synthesis has been investigated over decades as an
alternative route to obtain synthetic fuels from synthesis gas. FT is a high-performance …
alternative route to obtain synthetic fuels from synthesis gas. FT is a high-performance …
Carbon nanotube catalysts: recent advances in synthesis, characterization and applications
Carbon nanotubes are promising materials for various applications. In recent years,
progress in manufacturing and functionalizing carbon nanotubes has been made to achieve …
progress in manufacturing and functionalizing carbon nanotubes has been made to achieve …
Carbon nanotubes and nanofibers in catalysis
P Serp, M Corrias, P Kalck - Applied Catalysis A: General, 2003 - Elsevier
This review analyses the literature from the early 1990s until the beginning of 2003 and
covers the use of carbon nanotubes (CNT) and nanofibers as catalysts and catalysts …
covers the use of carbon nanotubes (CNT) and nanofibers as catalysts and catalysts …
Nanomaterials: stimulants for biofuels and renewables, yield and energy optimization
Sustainability has gained momentum due to climate change and environmental pollution.
Mankind is trying to look for safer fuels to meet the energy demands and conserve the world …
Mankind is trying to look for safer fuels to meet the energy demands and conserve the world …
Review on methods to deposit catalysts on structured surfaces
V Meille - Applied Catalysis A: General, 2006 - Elsevier
The methods used to deposit a catalyst on structured surfaces are reviewed. Physical
methods such as PVD and chemical methods (sol–gel, CVD, direct synthesis, etc.) are …
methods such as PVD and chemical methods (sol–gel, CVD, direct synthesis, etc.) are …
FeCrAl as a catalyst support
G Pauletto, A Vaccari, G Groppi, L Bricaud… - Chemical …, 2020 - ACS Publications
The iron-chromium-aluminum alloy (FeCrAl) is an exceptional support for highly exothermic
and endothermic reactions that operate above 700° C in chemically aggressive …
and endothermic reactions that operate above 700° C in chemically aggressive …
Cobalt catalysts on carbon-based materials for Fischer-Tropsch synthesis: a review
This review analyzes the literature from the 80's to the beginning of 2020 and covers the use
of carbon materials as supports for cobalt-based catalysts used in the Fischer Tropsch …
of carbon materials as supports for cobalt-based catalysts used in the Fischer Tropsch …
Microstructured reactors for distributed and renewable production of fuels and electrical energy
G Kolb - Chemical Engineering and Processing: Process …, 2013 - Elsevier
The current paper provides an overview of recent and past research activities in the field of
microreactors for energy related topics. The main research efforts in this field are currently …
microreactors for energy related topics. The main research efforts in this field are currently …
Methods for the catalytic activation of metallic structured substrates
A Montebelli, CG Visconti, G Groppi… - Catalysis Science & …, 2014 - pubs.rsc.org
Coating is the most widely used technique for the preparation of structured catalysts. This
paper reviews the main methods reported in the open literature for depositing catalytic …
paper reviews the main methods reported in the open literature for depositing catalytic …
Mass transfer and pressure drop in ceramic foams: a description for different pore sizes and porosities
GI Garrido, FC Patcas, S Lang… - Chemical Engineering …, 2008 - Elsevier
Mass transfer and pressure drop properties of alumina open-cell foams with pore counts
between 10 and 45PPI and porosities between 75% and 85% were studied in connection …
between 10 and 45PPI and porosities between 75% and 85% were studied in connection …