The effect of the addition of graphite nanoparticles into the electrolyte used to produce
plasma electrolytic oxidation (PEO) coatings on AZ91 and AZ80 magnesium alloys was …

Abstract AA2024, containing around 4% Cu and 1.5% Mg, has outstanding mechanical
properties among the aluminum alloys, but poor corrosion resistance. Because of its …

The wide application of Mgsingle bond Li alloys is limited by the poor corrosion resistance,
which needs to be improved by surface treatment. Plasma electrolytic oxidation (PEO) …

Oxide coatings formed by micro-arc oxidation (MAO) are usually considered to be quite
dense in structure. However, in this work, we present studies that show that the porosity of …

Ceramic coatings were produced on the surface of commercially pure (CP) aluminum using
plasma electrolytic oxidation in electrolyte solutions containing potassium permanganate …

Due to the need to develop methods that optimize the surface properties of lightweight alloys
such as aluminum, titanium, and magnesium and align with contemporary requirements of …

A dense magnesium hydroxide coating was established on the surface of Mg alloy by alkali
treatment before the micro arc oxidation (MAO) process, which can serve as the barrier layer …

The development of methods for the calculated and experimental investigations thermal
barrier coatings and thermal state of gas-turbine engine parts with a thermal barrier coatings …

Plasma electrolytic oxidation (PEO) is a promising method for the development of a new
generation of oxide coatings for degradable medical devices made from Mg and its alloys …

The article focuses on the results of the surface morphology and dielectric properties
research of the plasma electrolytic oxidation (PEO) coatings produced in the alkaline-silicate …