Running condition and material response fretting maps of incoloy 800 steam generator tubes...

Turnitin 降AI改写 早检测系统 早降重系统 Turnitin-UK版 万方检测-期刊版 维普编辑部版 Grammarly检测 Paperpass检测 checkpass检测 PaperYY检测

Progress in studying the fretting wear/corrosion of nuclear steam generator tubes

X Guo, P Lai, L Li, L Tang, L Zhang - Annals of Nuclear Energy, 2020 - Elsevier
Revealing the fretting failure law and mechanism of steam generator tubes is a critical issue
to ensure the safe operation of nuclear power plants. This paper reviews the current …
Lagre Referanse Sitert av 53 Beslektede artikler Alle 2 versjoner

Fretting wear resistance at ambient and elevated temperatures of 316 stainless steel improved by laser cladding with Co-based alloy/WC/CaF2 composite coating

H Ding, Y Cao, K Hua, Y Tong, N Li, L Sun, X Li… - Optics & Laser …, 2023 - Elsevier
The coating fabricated by laser cladding on the surface has been an effective way to
strengthen and enhance the wear resistance of alloys. However, the traditional Co-based …
Lagre Referanse Sitert av 33 Beslektede artikler Alle 2 versjoner

Revealing the critical failure factor and sub-surface damage mechanism of 316 stainless steel during fretting corrosion under the molten lead-bismuth eutectic

Y Cao, K Hua, N Li, Y Tong, Y Song, H Wu, Q Zhou… - Tribology …, 2023 - Elsevier
The critical failure factor and damage mechanism of 316 stainless steel during fretting
corrosion under the molten lead-bismuth eutectic (LBE) are specially investigated …
Lagre Referanse Sitert av 15 Beslektede artikler

Effect of the frequency on fretting corrosion behavior between Alloy 690TT tube and 405 stainless steel plate in high temperature pressurized water

Y Zhang, H Ming, L Tang, J Wang, H Qian, EH Han - Tribology International, 2021 - Elsevier
The effect of fretting frequency on fretting corrosion behavior between Alloy 690TT heat-
exchanger tube and 405 stainless steel plate in simulated secondary water of pressurized …
Lagre Referanse Sitert av 43 Beslektede artikler Alle 2 versjoner

The effectiveness of protective layer in reducing fretting wear of Alloy 690TT tubes/405 stainless steel plates

X Mi, P Tang, F **ong, X Bai, Q Sun, M Zhu - Tribology International, 2023 - Elsevier
Fretting experiments of Alloy 690TT tubes against 405 stainless steel (405 SS) plates were
carried out to evaluate the influence of temperature on fretting performance of Alloy 690TT …
Lagre Referanse Sitert av 16 Beslektede artikler

Comparative study on the fretting wear property of 7075 aluminum alloys under lubricated and dry conditions

P Zhang, L Zeng, X Mi, Y Lu, S Luo, W Zhai - Wear, 2021 - Elsevier
This paper investigates torsional-fretting wear properties of 7075 aluminum alloys under
lubricated and dry conditions. Fretting wear experiments are conducted under the flat-on-flat …
Lagre Referanse Sitert av 45 Beslektede artikler

Fretting wear evolution of γ-TiAl alloy

Y Yang, C Wang, Y Gesang, H Shang, R Wang… - Tribology …, 2021 - Elsevier
Fretting wear evolution of γ-TiAl alloy was investigated. Evolution of wear scar, tribolayer
and wear debris were studied using optical microscope and scanning electron microscope …
Lagre Referanse Sitert av 54 Beslektede artikler

Study on the fretting maps of Zircaloy-4 alloy against Inconel 718 alloy

X Yuan, X Zhang, Q Zhang, J Pu, G Li, P Ren… - Tribology …, 2021 - Elsevier
Fretting wear tests of Zircaloy-4 alloy against Inconel 718 alloy were conducted on a fretting
wear rig. The contact state and fretting running characteristics of Zircaloy-4 alloy were …
Lagre Referanse Sitert av 40 Beslektede artikler

Establishment of fretting maps of Zr alloy cladding tube mated with Zr alloy dimple in simulated primary water of pressurized water reactor

Y Zhang, J Lai, J Wang, L Gao, H Ming, J Wang… - Tribology …, 2023 - Elsevier
Fretting maps of Zr alloy tube under grid-to-rod configuration in high temperature
pressurised water were established. Running condition fretting map shows three fretting …
Lagre Referanse Sitert av 19 Beslektede artikler

Investigation on fretting wear mechanism of 316 stainless steel induced by Ni dissolution during pre-immersion corrosion in the liquid lead-bismuth eutectic (LBE)

K Hua, Y Cao, X Yu, Q Huang, Y Tong, Y Wang… - Tribology …, 2022 - Elsevier
Heat transfer tubes in nuclear power plants are easily damaged by fretting wear. The fretting
behaviour of the heat transfer tube related to the lead-bismuth eutectic (LBE) alloys needs to …
Lagre Referanse Sitert av 24 Beslektede artikler