Waste incineration is an important component of solid waste management systems in cities
worldwide, offering advantages such as rapid waste volume reduction, heat recovery, and …

Hot corrosion behaviour of Ni-base single crystal at 900℃ is investigated under three
different mixed salts. The result shows that hot corrosion degree in Na 2 SO 4+ NaCl+ NaVO …

In this work samples of corrosion products collected from waterwalls made of P235GH and
16Mo3 steel are investigated. The samples originated from a full-scale circulating fluidized …

Oxidation and hot corrosion behaviors of NiCrAlY, NiAlY and Ni-xMo-Al-Y (x= 1, 3, 5 and 10
wt%) alloys have been investigated. The results of the hot oxidation tests indicated that …

The hot corrosion behaviors of directed energy deposited Inconel 718/Haynes 25
functionally graded materials (FGMs) coated with 75% Na 2 SO 4+ 25% NaCl molten salt at …

Abstract The NiCr-Cr 3 C 2-CaF 2/BaF 2 coating with the NiAl bond coating was sprayed on
a Ni16Cr13Co4Mo (wt%) alloy by detonation-gun spray, and hot corrosion behaviors were …

This paper investigated the hot corrosion behavior of two types of coatings, namely
NiCoCrAlYHfSi and Al single bond Si coatings, used in gas turbines operating in a moderate …

In this study, an optimized duplex coating, consisting of a thick Cr 3 C 2-NiCr interlayer and a
top CrN film, were designed and deposited by HVOF and PVD. And then hot corrosion …

Oxy-combustion is one of the most promising technologies for carbon capture and
sequestration. When CO 2-neutral biomass is burned under oxy-combustion conditions …

The investigation focused on microstructural changes and hot corrosion behavior in various
salt environments (Na 2 SO 4+ 25 wt% K 2 SO 4 and Na 2 SO 4+ 25 wt% NaCl) at 900° C of …