Forging is a primary manufacturing process used in several manufacturing industries.
Aircraft and automobile industries are manufacturing products with high‐dimensional …

Flexible metal forming processes are novel ways to meet the growing needs for maintaining
economic feasibility in mass production and customization. The flexible forming processes …

The method of upsetting of large ingots has been investigated in this work. The proposed
method consists in upsetting of profiled workpieces with concave faces. An angle of the …

To enhance the forming quality of the forging and minimize the forging cost in the concave
radial forging process, this article examines the influence of process parameters (radial …

Deformation behaviors during swaging of an Al/Cu/Al layered clad composite were
investigated experimentally and by finite element (FE) analysis. Measured and predicted …

Zirconium alloy has been extensively used as a cladding material in nuclear power reactors
due to its low neutron absorption cross section, excellent mechanical properties, and …

A new method of plate forging with V-shaped dies is proposed. The deformation state of a
metal workpiece during forging has been investigated. The proposed method of forging …

An axisymmetric upper bound method model is proposed to analyze the inhomogeneity of
axial metal flow in the radial forging process from the viewpoint of end profile in the meridian …

In this paper, the inhomogeneous deformation in the radial direction of the cold radial forged
30SiMn2MoVA steel tube was studied by finite element method, analyzing the …

FE simulation was applied to study the material flow during infeed rotary swaging. The
neutral plane according to the process parameters was investigated and compared with …