A review of iron carbonate (FeCO3) formation in the oil and gas industry

R Barker, D Burkle, T Charpentier, H Thompson… - Corrosion …, 2018 - Elsevier
This paper reviews the information in the literature relating to FeCO 3 formation in the
context of oil and gas production. Numerous factors which influence the kinetics, physical …

A study by electrochemical impedance spectroscopy and surface analysis of corrosion product layers formed during CO2 corrosion of low alloy steel

R De Motte, E Basilico, R Mingant, J Kittel, F Ropital… - Corrosion …, 2020 - Elsevier
In the following research, electrochemical and surface analysis techniques are used to
define the main contributing factor to the protectiveness offered by a scale formed at high …

Bridge for the thermodynamics and kinetics of electrochemical corrosion: Modeling on dissolution, ionization, diffusion and deposition in metal/solution interface

Y Zhao, T Zhang, H **ong, F Wang - Corrosion Science, 2021 - Elsevier
A new model is describing complex dissolution-ionization-diffusion-deposition (DIDD)
process in metal/solution interface. Taking CO 2 corrosion of steel as an example for …

[HTML][HTML] Galvanic effects induced by siderite and cementite surface layers on carbon steel in aqueous CO2 environments

J Owen, F Ropital, GR Joshi, J Kittel, R Barker - Corrosion Science, 2022 - Elsevier
Abstract Siderite (FeCO 3) and cementite (Fe 3 C) layers develop naturally on carbon steel
surfaces in aqueous carbon dioxide (CO 2) environments. This study evaluates galvanic …

Investigation of the evolution of an iron carbonate layer and its effect on localized corrosion of X65 carbon steel in CO2 corrosion environments

A Lazareva, J Owen, S Vargas, R Barker, A Neville - Corrosion Science, 2021 - Elsevier
The general and localized corrosion of X65 carbon steel in CO 2-saturated environments
conducive to iron carbonate (FeCO 3) formation has been studied using electrochemical …

Failure analysis of CO2 corrosion of natural gas pipeline under flowing conditions

J Li, D Wang, F **e - Engineering Failure Analysis, 2022 - Elsevier
The CO 2 corrosion mechanism of pipelines is a controversial topic, especially under flowing
conditions. In this work, the CO 2 corrosion behavior of X80 steel under static and flowing …

Improvement on the CO2 corrosion prediction via considering the corrosion product performance

C Wang, X Xu, C Liu, X Luo, Q Hu, R Zhang, H Guo… - Corrosion …, 2023 - Elsevier
A mechanistic model for general CO 2 corrosion of carbon steel with protective iron
carbonate (FeCO 3) scales in the temperature range between 30∼ 90° C, and CO 2 partial …

[HTML][HTML] In situ SR-XRD analysis of corrosion product formation during 'pseudo-passivation'of carbon steel in CO2-containing aqueous environments

J Owen, D Burkle, GR Joshi, E Basilico, J Kittel… - Corrosion …, 2023 - Elsevier
Abstract In situ Synchrotron Radiation X-ray Diffraction (SR-XRD) is employed to follow the
evolution of corrosion products on X65 carbon steel in a CO 2-containing aqueous …

[HTML][HTML] New design principles for the bath towards chromate-and crack-free conversion coatings on magnesium alloys

S Liao, B Yu, X Zhang, X Lu, P Zhou, C Zhang… - Journal of Magnesium …, 2021 - Elsevier
Cracking and low thickness are major obstacles to the high corrosion performance of
conversion coating on magnesium alloy. In this work, the ratio of total acidity to pH (TA/pH) …

Corrosion mitigation behavior of mild steel in supercritical CO2 environments with varying the solution volume

H Hong, T Ye, J Zhang, ZM Wang - Corrosion Science, 2024 - Elsevier
The corrosion behavior of X70 steel in CO 2 saturated water at 60° C and 10 MPa was
investigated by limiting the exposed solution volumes. When the specific solution volume to …