Increasingly demanding performance standards and operating requirements are driving the
growing interest on lubrication technologies in gear transmission systems. Optimized gear …

The significance of polymer gears to transmit power and motion is increasing continuously
due to their inherent characteristics. Polymer gears have established themselves as …

An experimental investigation is conducted to identify the failure modes of the lubricated
PEEK gears under different loading conditions through the enclosed power flow test rig …

The high cycle fatigue behaviour of autoclave-cured carbon fibre-reinforced polymer (CFRP)
composite gears is investigated. The CFRP gears were milled from a composite plate and …

Gear pairs effectively transmit power and movement over short distances. Their design is
well-defined in the technical literature, including standards and handbooks. However, the …

Polymer gears manufactured with injection molding have been widely used in many
industries, but the unavoidable injection molding lunker defects limit the loading capacity …

The engineering characteristics of polymer gears, such as wear and fatigue resistance, are
dictated by the underlying processes that take place during the gear meshing phase. These …

Combining the loaded tooth contact analysis (LTCA) method and the gear dynamic model, a
wear prediction model for spur gears with tip relief is established. The simulated wear depth …

A reliable method of optimization of polymer gears remains, to date, an open challenge, due
to the lack of specific material characterization of polymers and to the complex nonlinear …

In this research work an extensive review on use of advance materials and performance of
polymer gears. Further, literature on polymer gears has been divided into four divisions …