Self-propagating high-temperature synthesis of advanced materials and coatings
EA Levashov, AS Mukasyan… - International …, 2017 - journals.sagepub.com
Self-propagating high-temperature synthesis (SHS) or combustion synthesis (CS) is a
rapidly develo** research area. SHS materials are being used in various fields, including …
rapidly develo** research area. SHS materials are being used in various fields, including …
Structures and properties of hard and superhard nanocomposite coatings
Various approaches to creating multicomponent nanocomposite coatings of high and
superhigh hardness (from≈ 30 to 100–120 GPa) are reviewed with particular emphasis …
superhigh hardness (from≈ 30 to 100–120 GPa) are reviewed with particular emphasis …
Tribological and electrochemical performances of Cr/CrN and Cr/CrN/CrAlN multilayer coatings deposited by RF magnetron sputtering
NE Beliardouh, K Bouzid, C Nouveau, B Tlili… - Tribology …, 2015 - Elsevier
Abstract CrN/CrAlN and Cr/CrN/CrAlN multilayers were grown with dual RF magnetron
sputtering. The application of these multilayers will be wood machining of green wood. That …
sputtering. The application of these multilayers will be wood machining of green wood. That …
Tribological properties of nanostructured TiAlN/W2N multilayer coating produced by PVD
X Xu, F Su, Z Li - Wear, 2019 - Elsevier
TiAlN/W 2 N multilayer coatings with various modulation periods from 140 to 680 nm were
deposited on AISI 304 L SS by multi-arc ion plating and DC magnetron sputtering. The …
deposited on AISI 304 L SS by multi-arc ion plating and DC magnetron sputtering. The …
Структура и свойства твёрдых и сверхтвёрдых нанокомпозитных покрытий
Одним из приоритетных направлений современной науки и техники является
разработка новых материалов, в частности, создание многокомпонентных …
разработка новых материалов, в частности, создание многокомпонентных …
Selection of boron based tribological hard coatings using multi-criteria decision making methods
H Çalışkan - Materials & Design, 2013 - Elsevier
Mechanical and tribological properties of hard coatings can be enhanced using boron as
alloying element. Therefore, multicomponent nanostructured boron based hard coatings are …
alloying element. Therefore, multicomponent nanostructured boron based hard coatings are …
Effect of Ar/N2 flow ratio on the microstructure and mechanical properties of Ti-Cr-N coatings deposited by DC magnetron sputtering on AISI D2 tool steels
Ti-Cr-N coatings were deposited on Si (100) and AISI D2 tool steel substrates by reactive
DC magnetron co-sputtering technique from titanium and chromium target in mixed Ar/N 2 …
DC magnetron co-sputtering technique from titanium and chromium target in mixed Ar/N 2 …
Comparative investigation of TiAlC (N), TiCrAlC (N), and CrAlC (N) coatings deposited by sputtering of МАХ-phase Ti2− хCrхAlC targets
DV Shtansky, PV Kiryukhantsev-Korneev… - Surface and Coatings …, 2009 - Elsevier
A comparative investigation of the structure and properties of TiAlC (N), TiCrAlC (N), and
CrAlC (N) coatings deposited by sputtering of МАХ-phase Ti2− хCrхAlC targets (where x= 0 …
CrAlC (N) coatings deposited by sputtering of МАХ-phase Ti2− хCrхAlC targets (where x= 0 …
Multicomponent nanostructured films for various tribological applications
DV Shtansky, PV Kiryukhantsev-Korneev… - International Journal of …, 2010 - Elsevier
Many engineering materials working under severe cutting, stam**, or bearing conditions
including humid and corrosive environments, as well as temperature fluctuation require a …
including humid and corrosive environments, as well as temperature fluctuation require a …
Plasma enhanced magnetron sputter deposition of Ti–Si–C–N based nanocomposite coatings
R Wei - Surface and coatings technology, 2008 - Elsevier
This paper reviews a Plasma Enhanced Magnetron Sputtering (PEMS) technology and a
series of studies of Ti–Si–C–N nanocomposite coatings deposited using this technique. The …
series of studies of Ti–Si–C–N nanocomposite coatings deposited using this technique. The …