The work discusses the corrosion behavior of a set of newly developed high strength and
highly ductile multiphase steels consisting of various fractions of bainite, intercritical ferrite …

Present work discusses the enhancement of hardness and tensile strength of the existing
quenched and tempered elastic rail clip (ERC) by modifying the microstructure to bainite via …

In this work, the effect of holding durations (10–60min) during austempering at 300, 350 and
400° C on the structure and properties of a 0.61 C-1.71 Si-0.86 Mn steel has been studied …

Pearlite is an important structure in carbon steel; however, the influence mechanism of
carbides in pearlite on its mechanical properties and microstructure evolution has not yet …

In this study, the dry sliding wear behaviour of multiphase steels (MPS) was investigated
with the help of a pin/ball-on-disc wear setup. The newly developed high strength and highly …

Quantification of different phases in multiphase materials and the determination of
compositions in material systems with extended solubility of the components are crucial for …

The effects of the cooling rate after hot deformation on phase transformation, the
microstructure of the designed nonquenched and tempered medium-carbon carbide-free …

Abstract In the present work, 0.67% C-1.71% Si-0.86% Mn nominal composition steel was
used to develop multiphase steels (bainite, retained austenite, intercritical ferrite and …

In the present work, existing Indian elastic rail clip steel (tempered martensite) is
microstructurally modified to bainite using austempering route. Crevice corrosion of elastic …

The concept of electron probe micro-analyzer (EPMA) was conceived by Raymond Castaing
in the late 1940s, and till today, EPMA remains the most accurate and precise tool for micro …