Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
Semantic integration of diverse data in materials science: Assessing Orowan strengthening
Abstract This study applies Semantic Web technologies to advance Materials Science and
Engineering (MSE) through the integration of diverse datasets. Focusing on a 2000 series …
Engineering (MSE) through the integration of diverse datasets. Focusing on a 2000 series …
Effect of cold rolling on nucleation, growth and coarsening of S-phase precipitates in Al-Cu-Mg alloy (AA2024): From heterogeneous nucleation to homogeneous …
The effect of cold rolling on the precipitation kinetics of the hardening phase has been
studied in industrial AA2024. Due to the relatively simple precipitation sequence and the use …
studied in industrial AA2024. Due to the relatively simple precipitation sequence and the use …
Develo** high performance mechanical properties at elevated temperature in squeeze cast Al-Cu-Mn-Fe-Ni alloys
B Lin, W Zhang, X Zheng, Y Zhao, Z Lou… - Materials …, 2019 - Elsevier
Microstructures and mechanical properties of T7 heat-treated Al-5.0 Cu-0.6 Mn-1.0 Fe alloys
with different Ni content prepared via squeeze casting were studied using tensile testing …
with different Ni content prepared via squeeze casting were studied using tensile testing …
[HTML][HTML] Influence of mean stress and overaging on fatigue life of aluminum alloy EN AW-2618A
Y Han, J Kruse, JM Rosalie, J Radners… - Materials Science and …, 2023 - Elsevier
Fatigue tests were performed on the forged aluminum alloy EN AW-2618A in the T61 state.
Different stress ratios (R=− 1, R= 0.1) were selected to study the influence of mean stress on …
Different stress ratios (R=− 1, R= 0.1) were selected to study the influence of mean stress on …
Enhancing reproducibility in precipitate analysis: a FAIR approach with automated dark-field transmission electron microscope image processing
High-strength aluminum alloys used in aerospace and automotive applications obtain their
strength through precipitation hardening. Achieving the desired mechanical properties …
strength through precipitation hardening. Achieving the desired mechanical properties …
A fast numerical method of introducing the strengthening effect of residual stress and strain to tensile behavior of metal matrix composites
Thermal residual stress and strain (TRSS) in particle reinforced metal matrix composites
(PRMMCs) are believed to cause strengthening effects, according to previous studies. Here …
(PRMMCs) are believed to cause strengthening effects, according to previous studies. Here …
Incorporating elasticity into CALPHAD-informed density-based grain boundary phase diagrams reveals segregation transition in Al-Cu and Al-Cu-Mg alloys
The phase-like behavior of grain boundaries (GBs), recently evidenced in several materials,
is opening up new possibilities in the design of alloy microstructures. In this context, GB …
is opening up new possibilities in the design of alloy microstructures. In this context, GB …
On the long-term aging of S-phase in aluminum alloy 2618A
The aluminum alloy 2618A is applied for engine components such as radial compressor
wheels which operate for long time at elevated temperatures. This results in coarsening of …
wheels which operate for long time at elevated temperatures. This results in coarsening of …
[HTML][HTML] Brinell-Hardness data (HBW 2.5/62.5) of aluminum alloy EN AW-2618A after different aging times and temperatures
C Rockenhäuser, P von Hartrott, B Skrotzki - Data in Brief, 2023 - Elsevier
The article covers data on the Brinell hardness of the forged precipitation-hardened
aluminum alloy EN AW-2618A in the initial T61 condition (ie slightly underaged) and after …
aluminum alloy EN AW-2618A in the initial T61 condition (ie slightly underaged) and after …
[HTML][HTML] High-throughput characterisation of the long-term ageing of an A357+ 1wt% Cu cast aluminium alloy using temperature gradient
A357 alloy is a widely studied cast aluminium alloy used in applications such as cylinder
heads or aerospace applications. The addition of 1wt% copper to this alloy modifies the …
heads or aerospace applications. The addition of 1wt% copper to this alloy modifies the …