Tungsten as material for plasma-facing components in fusion devices
V Philipps - Journal of nuclear materials, 2011 - Elsevier
The use of tungsten (W) as material for plasma-facing components (PFM) in fusion devices
is reviewed with respect to its plasma and material compatibility under burning plasmas …
is reviewed with respect to its plasma and material compatibility under burning plasmas …
Progress on the application of ELM control schemes to ITER scenarios from the non-active phase to DT operation
Progress in the definition of the requirements for edge localized mode (ELM) control and the
application of ELM control methods both for high fusion performance DT operation and non …
application of ELM control methods both for high fusion performance DT operation and non …
Plasma performance and operational space without ELMs in DIII-D
C Paz-Soldan, DIII-D Team - Plasma Physics and Controlled …, 2021 - iopscience.iop.org
Abstract A database of DIII-D plasmas without edge-localized modes (ELMs) compares the
operating space and plasma performance of stationary no-ELM regimes found in …
operating space and plasma performance of stationary no-ELM regimes found in …
The JOREK non-linear extended MHD code and applications to large-scale instabilities and their control in magnetically confined fusion plasmas
JOREK is a massively parallel fully implicit non-linear extended magneto-hydrodynamic
(MHD) code for realistic tokamak X-point plasmas. It has become a widely used versatile …
(MHD) code for realistic tokamak X-point plasmas. It has become a widely used versatile …
Principal physics developments evaluated in the ITER design review
RJ Hawryluk, DJ Campbell, G Janeschitz… - Nuclear …, 2009 - iopscience.iop.org
As part of the ITER Design Review and in response to the issues identified by the Science
and Technology Advisory Committee, the ITER physics requirements were reviewed and as …
and Technology Advisory Committee, the ITER physics requirements were reviewed and as …
Sputtering properties of tungsten 'fuzzy'surfaces
Sputtering yields of He-induced W 'fuzzy'surfaces bombarded by Ar have been measured in
the linear divertor plasma simulator PISCES-B. It is found that the sputtering yield of a fuzzy …
the linear divertor plasma simulator PISCES-B. It is found that the sputtering yield of a fuzzy …
Tungsten as first wall material in fusion devices
M Kaufmann, R Neu - Fusion Engineering and Design, 2007 - Elsevier
The observation in JET of co-deposition of tritium with carbon has led to a broad discussion
on the replacement of graphite by a high-Z material for the first wall coverage. Moreover, due …
on the replacement of graphite by a high-Z material for the first wall coverage. Moreover, due …
Advances in understanding of high-Z material erosion and re-deposition in low-Z wall environment in DIII-D
R Ding, DL Rudakov, PC Stangeby… - Nuclear …, 2017 - iopscience.iop.org
Dedicated DIII-D experiments coupled with modeling reveal that the net erosion rate of high-
Z materials, ie Mo and W, is strongly affected by carbon concentration in the plasma and the …
Z materials, ie Mo and W, is strongly affected by carbon concentration in the plasma and the …
Overview on plasma operation with a full tungsten wall in ASDEX Upgrade
Operation with all tungsten plasma facing components has become routine in ASDEX
Upgrade. The conditioning of the device is strongly simplified and short glow discharges are …
Upgrade. The conditioning of the device is strongly simplified and short glow discharges are …
Plasma wall interaction and its implication in an all tungsten divertor tokamak
ASDEX Upgrade has recently finished its transition towards an all-W divertor tokamak, by
the exchange of the last remaining graphite tiles to W-coated ones. The plasma start-up was …
the exchange of the last remaining graphite tiles to W-coated ones. The plasma start-up was …