Glass-ceramics in dentistry: Fundamentals, technologies, experimental techniques, applications, and open issues
Dental glass-ceramics (DGCs) are developed by controlled crystallization of oxide glasses
and form an important group of biomaterials used in modern dentistry. They are also of great …
and form an important group of biomaterials used in modern dentistry. They are also of great …
Selected spectroscopic techniques for surface analysis of dental materials: A narrative review
K Kaczmarek, A Leniart, B Lapinska, S Skrzypek… - Materials, 2021 - mdpi.com
The presented work focuses on the application of spectroscopic methods, such as Infrared
Spectroscopy (IR), Fourier Transform Infrared Spectroscopy (FT-IR), Raman spectroscopy …
Spectroscopy (IR), Fourier Transform Infrared Spectroscopy (FT-IR), Raman spectroscopy …
Effect of CaO/SiO2 ratio on phase transformation and properties of anorthite-based ceramics from coal fly ash and steel slag
Anorthite-based ceramics were produced entirely from coal fly ash and steel slag. The effect
of the CaO/SiO 2 ratio (0.12–0.8) on the phase transitions was examined by adding steel …
of the CaO/SiO 2 ratio (0.12–0.8) on the phase transitions was examined by adding steel …
Methacrylate peak determination and selection recommendations using ATR-FTIR to investigate polymerisation of dental methacrylate mixtures
AHS Delgado, AM Young - PLoS One, 2021 - journals.plos.org
Investigation of polymerisation kinetics using ATR-FTIR systems is common in many dental
studies. However, peak selection methods to calculate monomer-polymer conversion can …
studies. However, peak selection methods to calculate monomer-polymer conversion can …
Analysis of microbeads in cosmetic products in the United Arab Emirates
RZ Habib, MMS Abdoon, RM Al Meqbaali… - Environmental …, 2020 - Elsevier
The microparticle content of 37 common facial and body scrubs commercially available in
the United Arab Emirates was analyzed. The chemical composition, ash content, physical …
the United Arab Emirates was analyzed. The chemical composition, ash content, physical …
Investigation of physical, mechanical, thermal, and tribological characterization of tricalcium phosphate and zirconia particulate reinforced dental resin composite …
The proposed study aimed to fabricate and investigate the effect of nano tri-calcium
phosphate and zirconia on the physico-mechanical, thermal, and tribological properties of …
phosphate and zirconia on the physico-mechanical, thermal, and tribological properties of …
Thermal, chemical and physical analysis of VDW. 1Seal, Fill Root ST, and ADseal root canal sealers
S Saber, MM Galal, AG Ismail, TM Hamdy - Scientific Reports, 2023 - nature.com
This study aimed to evaluate the thermal, chemical, and physical properties of VDW. 1Seal,
Fill Root ST, and ADseal sealers. Thermal properties were analyzed using …
Fill Root ST, and ADseal sealers. Thermal properties were analyzed using …
Novel silica sand hollow fibre ceramic membrane for oily wastewater treatment
Hollow fibre ceramic membranes are well-known to have unique characteristics, including
superior thermal, chemical, and mechanical stabilities. The main drawback of ceramic …
superior thermal, chemical, and mechanical stabilities. The main drawback of ceramic …
[HTML][HTML] Characterisation of a 3D-printed alkali-activated material based on waste mineral wool at room and elevated temperatures
The building sector is the largest energy consumer in the European Union (EU), accounting
for approximately 40% of energy consumption and 36% of CO 2 emissions [1]. The demand …
for approximately 40% of energy consumption and 36% of CO 2 emissions [1]. The demand …
Alumina and zirconia-reinforced polyamide PA-12 composites for biomedical additive manufacturing
This work aimed to prepare a composite with a polyamide (PA) matrix and surface-modified
ZrO2 or Al2O3 to be used as ceramic fillers (CFs). Those composites contained 30 wt …
ZrO2 or Al2O3 to be used as ceramic fillers (CFs). Those composites contained 30 wt …