Bioceramics have been widely utilized for orthopaedic applications in which the
biocompatibility and mechanical properties of the materials are vital characteristics to be …

ABSTRACT Alumina–zirconia (Al2O3–ZrO2) composite was prepared by combustion
method and used to remove Congo red and Methylene blue from aqueous solutions. It was …

Abstract Effect of different (2, 2.5, 3) mol.% yttria inside zirconia matrix alongside the effect of
3 mol.% Ytria stabilized zirconia (YSZ) inside the alumina matrix is studied. High hardness …

The effect of second phase addition of zirconia on the mechanical response of textured
alumina was analysed. Highly textured monolithic tape-casted alumina was obtained …

The advent of high-throughput plasma spray systems that allow axial feeding encourages
the study of using liquid feedstock for various next-generation functional applications. The …

Undoped and 3 mol% yttrium doped ZrO 2–Al 2 O 3 composite powders with partially
stabilized ZrO 2 (PSZ) content varying from 0 to 30 wt% were prepared by a co-precipitation …

Structural ceramics such as Al 2 O 3 and Al 2 O 3–ZrO 2 composites are widely used in
harsh environment applications. The conventional sintering process for fabrication of these …

An attempt has been made to correlate the mechanical properties with microstructure and
machining performance of zirconia toughened alumina composite fabricated from different …

Composite NOx sensors were fabricated by combining partially and fully stabilized yttria-
doped zirconia with alumina forming a composite electrolyte, Y2O3-ZrO2-Al2O3, and …

Ceramics long history in biomedical field is related to their high biocompatibility and
mechanical properties. Precisely, for joint replacements, wear resistance is fundamental, so …