The production of closed-cell metallic foams has been of interest to the scientific community
and industry for decades, owing to their unique properties, which include high specific …

Commercially pure titanium (cp-Ti) and Ti–6Al–4V alloy have emerged as excellent
candidates for use as biomaterials in medical implants due to their high strength-to-weight …

Polyglycolic acid (PGA) was successfully synthesized via solution and melt/solid
polycondensations. PGA was synthesized by solution polymerization under vacuum by …

Thermal desorption behaviors of titanium hydride powders were studied using simultaneous
TG-TDS accompanied with TG-DSC measurements at the heating rate of 1.5, 2.5, 5, 10, 15 …

Stoichiometric TiH 2 nano-crystalline powder with particle mean size of less than 30 nm was
synthesized for the first time via the Guen-Miller Flow-Levitation method. Details of the …

Thermal decomposition of titanium hydrides in electrochemically hydrogenated electron
beam melting (EBM) and wrought Ti–6Al–4V alloys containing 6 wt% β is compared …

The non-isothermal decomposition kinetics of brucite under nitrogen atmosphere was
studied using thermogravimetry and XRD techniques. The curves of mass loss with …

Abstract Single-phase, submicron La 0.6 Sr 0.4 CoO 3− δ (LSC) powder was prepared via a
polymeric complexation method at various heating/cooling rates. The optimum powder slurry …

This study aims to address the poor thermal stability of titanium hydride. Surface
microstructural observations, differential thermal analysis, and electron-probe analysis of the …

In this work, titanium hydride powder (TiH 2) was coated by an electroless method through
an aqueous coating bath consisting of nickel-phosphorus compounds. Energy Dispersive …